Originally posted by F1GT:
The better way to do it is go from under the car.
1)open the flap on the shield:
there are some bolts under the frt bumper shield you have to remove. After that it's like a trap door.
2)Take off bumper bracket:
There are 3 nuts and a bolt or screw on this "L" shaped bracket you need to remove to make room for the lamp to come out. Otherwise you will have to FORCE them out, which is NOT the way to do it because it will damage the paint on the fascia or you might crack the lens. If you look at the fender and see how the frt bumper/fascia is connected to each other, you can see the L I'm talking about. Well, the otherside(inside) is where the black "L" shape bracket is. Remove it.
3)take off parking lamp, 3 screws, remove them, then unscrew the bulbs.
4)put new bulbs in or use old ones, check to see if they light up.
5)reverse the order for install.
The better way to do it is go from under the car.
1)open the flap on the shield:
there are some bolts under the frt bumper shield you have to remove. After that it's like a trap door.
2)Take off bumper bracket:
There are 3 nuts and a bolt or screw on this "L" shaped bracket you need to remove to make room for the lamp to come out. Otherwise you will have to FORCE them out, which is NOT the way to do it because it will damage the paint on the fascia or you might crack the lens. If you look at the fender and see how the frt bumper/fascia is connected to each other, you can see the L I'm talking about. Well, the otherside(inside) is where the black "L" shape bracket is. Remove it.
3)take off parking lamp, 3 screws, remove them, then unscrew the bulbs.
4)put new bulbs in or use old ones, check to see if they light up.
5)reverse the order for install.
Comment