Painted my calipers! - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

Painted my calipers!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Painted my calipers!

    This was a simple job really. For the caliper in the pictures (passenger side) I unbolted the cliper, rotated it out from the rotor, and held it in place with a pipe cleaner attached to the spring (so as not to put too much pressure on the brake line.) I taped off all bolt holes, the brake line (solvent from the paint can damage rubber) and of course the rotor. I got a little overspray on the rotor but the paint was still fairly fresh and cleaned off easily.

    I applied about four coats of color (probably one too many) and three coats of clear. It only took about half an hour for each coat to dry (has anyone been checking out the grass fires in OK on CNN?? That dryness helped me out!!!) I painted both brackets while they were still attached to the rotor. Honestly I would rather mask til I drop than bust my balls trying to take everything apart.

    It took two days to do the front two calipers just because I only have the stock jack, so I could only do one side at a time. I need to get some jacks.

    Tell me what you think!!

    http://www.badongo.com/pic.php?file=...6_IMG_1383.jpg

    http://www.badongo.com/pic.php?file=...6_IMG_1384.jpg

    http://www.badongo.com/pic.php?file=...6_IMG_1381.jpg
    -Eric<br />2002 Navy Blue Camaro...Striped and Stalled. 35th Anniversary SS wheels <br />Best ET: 15.384 @ 88.32 on street tires<br />Project Whitney: Goal, 14.0 1/4 by summer 2008.

  • #2
    nice!!! i plan to do mine real soon, should i juts tape everything off(original plans)? thats what i would like to do!! thanks chet!!

    Comment


    • #3
      I forgot, I also taped off the caliper pistons. Very important!!! I didn't want to take my brackets off, that's why I taped everything.

      I tried painting the caliper both ways too: one way I did it as I described in my first post. The second time I took it completely off and hung it from the spring. It was harder to paint the second way. Just mask til you drop!! Cover those caliper pistons!

      [ January 06, 2006, 09:49 PM: Message edited by: Camarorulz ]
      -Eric<br />2002 Navy Blue Camaro...Striped and Stalled. 35th Anniversary SS wheels <br />Best ET: 15.384 @ 88.32 on street tires<br />Project Whitney: Goal, 14.0 1/4 by summer 2008.

      Comment


      • #4
        looks awsome...i love the wheels too


        87 Firebird RIP
        96 Camaro RS RIP
        94 Patriot Red 1LE Z28 - Sold
        02 WS6 TA - Sold

        Comment


        • #5
          Re: Painted my calipers!

          Your car is NBM right? What color hight temp paint did you paint them. I found a color called dark ford blue by Duplicolor that almost matches my paint but not exactly. I was wondering if you found a better color and what the name and maker of it is. I am painting mine tonight.

          Comment


          • #6
            Re: Painted my calipers!

            the dark blue is going to get dirty and of limited value.
            I would have done it in red or yellow.
            Phil

            Comment


            • #7
              Re: Painted my calipers!

              looks great, probably one of the best mods i have done up to this point, and its really simple to do

              Comment


              • #8
                Re: Painted my calipers!

                looks sweet
                1997 Camaro LS1 RS
                1994 Camaro - Sold
                1999 Trans am Vert - Sold

                A Few Mods....

                Comment


                • #9
                  Re: Painted my calipers!

                  good job, looks nice...

                  Comment


                  • #10
                    Re: Painted my calipers!

                    Nice color choice.
                    Welcome future UK stars... Darius Miller, Deandre Liggins, Kevin Galloway, Josh Harrellson

                    Comment

                    Latest Topics

                    Collapse

                    • Andy H
                      Transmission removal help!!
                      by Andy H
                      Hey everyone! I've been trying to remove my transmission for two days now! I need to replace the clutch. Only thing I've got left holding the transmission...
                      2 weeks ago
                    • 2.8 Bird
                      Abs inop
                      by 2.8 Bird
                      Hello, so I changed the front bearings on the bird and the ABS inoperative light came on. I made a mistake of not removing negative battery cable. Now...
                      2 weeks ago
                    • fishin
                      Intermittent Headlight Function 97 Firebird
                      by fishin
                      I usually have to double, triple my headlight switch for them to come up on my 97 Firebird. I cleaned all connections. Could it be the headlight switch...
                      2 weeks ago

                    FORUM SPONSORS

                    Collapse
                    Working...
                    X