help with replacing fog light bulbs

[v6mOtOrhEAdftOp]

Ok, today i went out and bought replacement bulbs and tried to change them for my 99 firebird. I went under the car and noticed that a 3/8 is too small for the bolts and a 7/16 is too large? This is for my plastic covering. I was wondering, anyone have any suggestions on how to go along and gett hsi done?

[J. Henley 17]

It's metric, just like everything else on the car.

I think I used either a 9mm or 10mm, but I'm not really sure... haven't done it in a while.

[v6mOtOrhEAdftOp]

i tried a 10 and it was too small. An 11 is too big

[Stock98camaro]

I replaced mine from the top of the car. :shrug: I just felt around and found it, and replaced it.

[v6mOtOrhEAdftOp]

yea but do u have a firebird? you have the headlights int he way on the firebird. I guess I could always wait until i replace my headlight motor

[J. Henley 17]

Just use some pliers... they shouldn't be too tight.

[v6mOtOrhEAdftOp]

i tried and tried, but nothign worked. For some reason, there are nuts behind it. I think some1 worked on it b4 and put the screws in wrong. I hate dumbasses like that. I'm just gonna drill the screws out and replace them.

[geo 95 batbird]

put your car in ramps once up on both side on the bottom of the bumper there's 3 push pins pull them out once out u could pull on it and u be able to reach your foglights from behind and changed the bulb is very easy i done 3 times already. And for the bolt try using a 12 point socket it would do the trick. I hope this help

[v6mOtOrhEAdftOp]

thanks i'll try it once i get home today