Getting stickers off safely - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

Getting stickers off safely

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Getting stickers off safely

    I have this sticker for my apartment I won't be needing anymore on my bumper. I tried taking it off, but no go. Is there a paint safe way to take it off?

  • #2
    I would try a hair blow dryer to heat it up and then you should be able to peel it off...
    \"If I have seen further, it is by standing upon the <br />shoulders of giants.\" (Isaac Newton)

    Comment


    • #3
      I took my dealer tags off that way. I took a hair dryer and just held it there for a few minutes, and they slowly started to come off. I then used a claybar to get the remaining chunks of glue off.
      The hotter the hair dryer the easier the stickers come off, good luck.
      <b>« Red <i><a href=\"http://sandman.v8tec.com\" target=\"_blank\">Firebird</a></i> »</b>

      Comment


      • #4
        I'll try that. Thanks.

        Comment


        • #5
          what about for those annoying "CALL GM FOR ROADSIDE ASSISTANCE" stickers on the windows? how to get them off?
          <b>*§*Julian*§*</b><br />*~*~*~<br />2000 Grand Prix GTP -Daytona 500 Edition (only 2000 made) - Supercharged 3.8L V6<br /><br />1998 3.8L V6 A4 Firebird w/ W68 package, Y87, T-TOPS!<br /><br /><a href=\"http://myweb.usf.edu/~jadidona/index.html\" target=\"_blank\">MY SITE - CHECK IT!</a>

          Comment


          • #6
            Just roll down your window [img]tongue.gif[/img]
            Or, you can heat them up and take a razor blade and gently swipe it off.
            Then just get the rest of it off with some really fine steel wool and lots of dish detergent/water mix.
            <b>« Red <i><a href=\"http://sandman.v8tec.com\" target=\"_blank\">Firebird</a></i> »</b>

            Comment


            • #7
              I would agree with using a razorblade on glass. Works well around the house too if you don;t like to use masking tape when painting around window
              Zaino; FireBatCave Decals; Red Inside<br /><br />K&N Filter & Lid; Removed MAF screen; FRA; Raised Air Box; 180°F Stat; BMR STB; 3\" Catco & S-pipe; Borla Cat-Back; O2 Sim; HPPIII; NGK TR55s; Taylor 8mm wires<br /><br /> <a href=\"http://www.cardomain.com/id/cbass300\" target=\"_blank\">http://www.cardomain.com/id/cbass300</a>

              Comment

              Latest Topics

              Collapse

              • Andy H
                Transmission removal help!!
                by Andy H
                Hey everyone! I've been trying to remove my transmission for two days now! I need to replace the clutch. Only thing I've got left holding the transmission...
                2 weeks ago
              • 2.8 Bird
                Abs inop
                by 2.8 Bird
                Hello, so I changed the front bearings on the bird and the ABS inoperative light came on. I made a mistake of not removing negative battery cable. Now...
                2 weeks ago
              • fishin
                Intermittent Headlight Function 97 Firebird
                by fishin
                I usually have to double, triple my headlight switch for them to come up on my 97 Firebird. I cleaned all connections. Could it be the headlight switch...
                3 weeks ago

              FORUM SPONSORS

              Collapse
              Working...
              X