I decided to paint my car - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

I decided to paint my car

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • I decided to paint my car

    Here is the story. I was hit by a fed ex truck about 1.5 months ago on the rear pass. side 1/4 panel. and 2 days later I was hit in the front 1/4 pannel next to the nose. This past weekend I pulled out the rear dent. I bought a suction cup dent puller from pepboys and that pulled it out about half way. Then I took off the rear speaker and started pushing it out from the inside. so now the dent on the back of the car went from 1 big dent to 3 little dents. gonna work on getting the three little dents out a little better this weekend. The front dent is just a bent bracket that I can fix/replace easily this weekend also. once both of those are pulled/fixed to my liking I am going to sand down the whole car and fix all of the little door dings and other little dents that I have. Then I get to paint the car. I have a compressor and a paint gun, an area to do it, and experiance using all the equiptment needed. Now all I have to do is get the color of my car from the vin and have it made at a paint shop. I also wanted to see who has allready had their car painted? did you use the same color or go a little different? I should have it all finnished in about 2 weeks (doing it all on the side, and weekends) and will post pics when I'm done [img]smile.gif[/img]
    1996 Y87 Camaro, 175.0 rwhp, 211.6 rwtq.....1/4 15.500@88.54 &lt;----- Needs work!!<br />-CAI, Custom bent S-Pipe, LS1 I-Pipe, Flowmaster 80 series, !MAF, manual fan switch, relocated trunk pop switch, 180 degree t-stat, More to come!<br /> <a href=\"http://camaro.wbisolutions.com\" target=\"_blank\">http://camaro.wbisolutions.com</a> <p>WANTED!!! Naked and handcuffed!

  • #2
    Looking forward to seeing the finished product. [img]graemlins/thumbsup.gif[/img]
    2000 GTP<br />Thrasher CAI, 3.4\" pulley, DHP PCM<br />Member RedLineVSix<br />Best ET-14.02<br />Best Trap-97.15

    Comment


    • #3
      Goodluck [img]smile.gif[/img] You can come over and remove my dent too! My car got hit in the rear pasenger side 1/4 panel also, but it was a hit and run so I have no clue who did it. :( :mad: Still makes me mad everytime I look at it :mad:
      ~Jennifer~<p>« Black 2002 WS6 » <br />¤ Flowmaster 80 <br />¤ Painted Calipers | Black / Silver Decals<br />¤ 5% Tint | All Around<br />¤ Zaino | =)

      Comment


      • #4
        drive on down to houston and I'll take a look at it :D I was also thinking about painting the CAMARO letters in the back black also. And maybe paint on some racing stripes. But who knows, only time will tell what I do :D

        [ January 08, 2002: Message edited by: veesix ]</p>
        1996 Y87 Camaro, 175.0 rwhp, 211.6 rwtq.....1/4 15.500@88.54 &lt;----- Needs work!!<br />-CAI, Custom bent S-Pipe, LS1 I-Pipe, Flowmaster 80 series, !MAF, manual fan switch, relocated trunk pop switch, 180 degree t-stat, More to come!<br /> <a href=\"http://camaro.wbisolutions.com\" target=\"_blank\">http://camaro.wbisolutions.com</a> <p>WANTED!!! Naked and handcuffed!

        Comment

        Latest Topics

        Collapse

        FORUM SPONSORS

        Collapse
        Working...
        X