what bolts have to be undone to get my headlights out on a 2002 v6
Announcement
Collapse
No announcement yet.
Headlights
Collapse
X
-
Just one bolt if you have a 1998-2002 Camaro.
There's an "L-bracket" that holds the headlight to the frame. There's two bolts on this bracket. One is to the frame and the other is to the headlight enclosure. Unscrew the one on the headlight enclosure. You should be able to wiggle the entire headlight assembly out. Notice the tabs that hold the headlight assembly in. You have to move the headlight to the center of the car of the car and then work it out. If you're careful, you won't scratch anything. I've done this twice now and it's the easiest way to remove the headlight and get access to the entire turn signal assembly.
Here's a picture from a member on this board, nikkev:
Just unscrew the bolt right under the bracket. I believe it is a 10mm socket, but I can't remember exactly. If it's not, it's definitely around there. Hope this helps!Yes, I know \"Artic\" should be spelled \"Arctic\". Can any of the mods change this?
Comment
Latest Topics
Collapse
-
by ssms5411Had to be evacuated Monday again after a fire was going on the hill behind us. Only 3-4 hours, they did a good job getting it under control. Especially...2 weeks ago
Comment