I just installed reverse glow gauges in my firebird and now the needles are in the wrong spot and don't move and I can't get them fixed....can anyone help me out????
Announcement
Collapse
No announcement yet.
Installed gauges...needles don't move..HELP!
Collapse
X
-
take the needles off
turn the car on, while engine is cold
place the needls all on the lowest marks
unless u broke them, thats how u fix it.... you should have take them off while the car was running and marked where they were at ...
-
Originally posted by Big Tymer:
take the needles off
turn the car on, while engine is cold
place the needls all on the lowest marks
As for the needles not moving they are probably pressed on too far or the overlay is not being held tight against the gauge face and it is rubbing against the needles. The last overlay I did I had to glue the overlay down on top of the stock gauge face with a spray headliner adhesive (double sided tape didn't cut it). That's why I'm not installing them on my Camaro.
Comment
Latest Topics
Collapse
-
by KubesBefore I replaced the Lower and upper intake gaskets, plugs and wire etc etc I had no starting issues, car even ran okay
i bought this car a couple...1 week ago -
by 2.8 BirdIt's been very hot in my place and the 160 is not working too well now. Perhaps 160 is just opening up to soon that it not giving the radiator time to...1 week ago
-
by ssms5411My regular bulbs at night doesn’t light up to well, hopefully they are brighter. Got them from Screaming Chicken. Anyone else have any luck with led...3 weeks ago
-
95 Camaro 3400 V6, power windows, radio and power top have stopped working. Fuse and circuit breakers appear to be good. I have accessed the inside...3 weeks ago
Comment