invinca-shield - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

invinca-shield

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Well, i was thinkin that you could bring a heater to the garage. Either that or a hair dryer to warm it a little bit, not cook it. Just slap it on and put it in place and squeeze the water out, then blow some warm air to it and keep squeezing the water out.

    It's raining now so I can't install the rest...bummer.... at least I have partial proctection...if you want I'll take a pic for you to see where I cut it.
    [img]graemlins/burnout.gif[/img]
    1999 Pewter Camaro M5<br />Y87 Performance Package, Sport Appearance Package, Diamond Clears<br />Factory SS Hood, Free Ram Air Mod, Whisper Lid w/ K&N Air Filter<br />CarSound Cat 94009, B&B Tri-Flo w/ Quad Tips<br />BMR SFC, BMR STB, KVR Blank Rotors, Hawk HPS Pads<br />Black Painted Calipers w/ CAMARO Decal, 245/50 Dunlop SP Sport 5000<br />20% Rear 35% Side Tint, Red Reflective Inlays, Invincishield<br /><b>Young girls avert their eyes, weak men tremble, Ford dealers faint.</b>

    Comment


    • #17
      Sure I would love to see a pic! The weather is going back up into the 60's for most of the week including this weekend so i might try and do all on sunday and let it sit in the garage overnight. I should rain late sunday and into monday though. Do u think i should go ahead and do all on sunday or wait. After monday and tuesday the highs go back up to 60's and 70's!! I really want to do it sunday(only free time till 7pm). How long should i wait for it to be nice and dry i read it take a month for it to be completely dry?
      Check out my cardomain site!<br /><a href=\"http://members.cardomain.com/99pewterv6\" target=\"_blank\">My Car</a>

      Comment


      • #18
        I'll take a pic today or tomorrow and do a close up on the areas of worry. And as for it to be dry, as long as you squeeze out the air and water, it should stick pretty good. Its still raining here, so I need to wait and wash it again.
        1999 Pewter Camaro M5<br />Y87 Performance Package, Sport Appearance Package, Diamond Clears<br />Factory SS Hood, Free Ram Air Mod, Whisper Lid w/ K&N Air Filter<br />CarSound Cat 94009, B&B Tri-Flo w/ Quad Tips<br />BMR SFC, BMR STB, KVR Blank Rotors, Hawk HPS Pads<br />Black Painted Calipers w/ CAMARO Decal, 245/50 Dunlop SP Sport 5000<br />20% Rear 35% Side Tint, Red Reflective Inlays, Invincishield<br /><b>Young girls avert their eyes, weak men tremble, Ford dealers faint.</b>

        Comment


        • #19
          I'm going to install it today! Weather is good. Do u have pics of your car? If so, i want to see. I was looking at your sig and saw you had a 99 pewter as well.
          Check out my cardomain site!<br /><a href=\"http://members.cardomain.com/99pewterv6\" target=\"_blank\">My Car</a>

          Comment


          • #20
            I didn't take a pic over the weekend, I got wasted. I will upload it to nite and post a link.... [img]graemlins/burnout.gif[/img]
            1999 Pewter Camaro M5<br />Y87 Performance Package, Sport Appearance Package, Diamond Clears<br />Factory SS Hood, Free Ram Air Mod, Whisper Lid w/ K&N Air Filter<br />CarSound Cat 94009, B&B Tri-Flo w/ Quad Tips<br />BMR SFC, BMR STB, KVR Blank Rotors, Hawk HPS Pads<br />Black Painted Calipers w/ CAMARO Decal, 245/50 Dunlop SP Sport 5000<br />20% Rear 35% Side Tint, Red Reflective Inlays, Invincishield<br /><b>Young girls avert their eyes, weak men tremble, Ford dealers faint.</b>

            Comment


            • #21
              Heres some pics of my car, might need to copy and paste
              http://www.fbody.com/members/f1gtcamaro/Dusty1.JPG

              http://www.fbody.com/members/f1gtcamaro/Dusty2.JPG

              http://www.fbody.com/members/f1gtcamaro/Dusty3.JPG

              http://www.fbody.com/members/f1gtcamaro/B&B1.JPG

              http://www.fbody.com/members/f1gtcamaro/8.JPG
              1999 Pewter Camaro M5<br />Y87 Performance Package, Sport Appearance Package, Diamond Clears<br />Factory SS Hood, Free Ram Air Mod, Whisper Lid w/ K&N Air Filter<br />CarSound Cat 94009, B&B Tri-Flo w/ Quad Tips<br />BMR SFC, BMR STB, KVR Blank Rotors, Hawk HPS Pads<br />Black Painted Calipers w/ CAMARO Decal, 245/50 Dunlop SP Sport 5000<br />20% Rear 35% Side Tint, Red Reflective Inlays, Invincishield<br /><b>Young girls avert their eyes, weak men tremble, Ford dealers faint.</b>

              Comment


              • #22
                Pics dont work.
                Check out my cardomain site!<br /><a href=\"http://members.cardomain.com/99pewterv6\" target=\"_blank\">My Car</a>

                Comment


                • #23
                  did u copy and paste it?
                  1999 Pewter Camaro M5<br />Y87 Performance Package, Sport Appearance Package, Diamond Clears<br />Factory SS Hood, Free Ram Air Mod, Whisper Lid w/ K&N Air Filter<br />CarSound Cat 94009, B&B Tri-Flo w/ Quad Tips<br />BMR SFC, BMR STB, KVR Blank Rotors, Hawk HPS Pads<br />Black Painted Calipers w/ CAMARO Decal, 245/50 Dunlop SP Sport 5000<br />20% Rear 35% Side Tint, Red Reflective Inlays, Invincishield<br /><b>Young girls avert their eyes, weak men tremble, Ford dealers faint.</b>

                  Comment


                  • #24
                    Thats sweet!!! I like the exhaust! Which one is it? See my sig for pics of mine. :eek:
                    Check out my cardomain site!<br /><a href=\"http://members.cardomain.com/99pewterv6\" target=\"_blank\">My Car</a>

                    Comment


                    • #25
                      That's the B&B Tri-Flow. I went to ur page and voted for the exhaust. It is one of the most fun of all the mods that I did. I don't race my car but every once in a while I do romp on it and corner hard, but the exhaust is way more fun, especially in parking lot structures where it echoes.
                      1999 Pewter Camaro M5<br />Y87 Performance Package, Sport Appearance Package, Diamond Clears<br />Factory SS Hood, Free Ram Air Mod, Whisper Lid w/ K&N Air Filter<br />CarSound Cat 94009, B&B Tri-Flo w/ Quad Tips<br />BMR SFC, BMR STB, KVR Blank Rotors, Hawk HPS Pads<br />Black Painted Calipers w/ CAMARO Decal, 245/50 Dunlop SP Sport 5000<br />20% Rear 35% Side Tint, Red Reflective Inlays, Invincishield<br /><b>Young girls avert their eyes, weak men tremble, Ford dealers faint.</b>

                      Comment


                      • #26
                        Here are the pics, it's a little dirty after the rain....
                        Copy and paste!!


                        http://www.fbody.com/members/f1gtcamaro/Shield1.JPG

                        http://www.fbody.com/members/f1gtcamaro/Shield2.JPG

                        http://www.fbody.com/members/f1gtcamaro/Shield3.JPG

                        http://www.fbody.com/members/f1gtcamaro/Shield4.JPG

                        http://www.fbody.com/members/f1gtcamaro/Shield5.JPG

                        http://www.fbody.com/members/f1gtcamaro/Shield6.JPG

                        http://www.fbody.com/members/f1gtcamaro/Shield7.JPG
                        1999 Pewter Camaro M5<br />Y87 Performance Package, Sport Appearance Package, Diamond Clears<br />Factory SS Hood, Free Ram Air Mod, Whisper Lid w/ K&N Air Filter<br />CarSound Cat 94009, B&B Tri-Flo w/ Quad Tips<br />BMR SFC, BMR STB, KVR Blank Rotors, Hawk HPS Pads<br />Black Painted Calipers w/ CAMARO Decal, 245/50 Dunlop SP Sport 5000<br />20% Rear 35% Side Tint, Red Reflective Inlays, Invincishield<br /><b>Young girls avert their eyes, weak men tremble, Ford dealers faint.</b>

                        Comment


                        • #27
                          Looks like you got the kit for the sports apperence package. I didnt get that kit(didnt really want pieces for the GFX b/c the right one is scatched up. Did u get the mirror peices? I cant figure out how those go on? The pices that go under the headlight and around the fog lights were a B*%^H to install! so was the front bottom peice in the middle! Any thing with the triangle cuts are the hard peices! Well anyway i will wait to install the mirror, mirror suppots, fenders, and the Driver side piece that goes under the fog and above the GFX till spring. I couldnt get the Driver side GFX off i just broke the plastic pins but it still holds on tho. so far my Invinca-Sheld is working and sticking good. The piece on the top nose of the car i installed a little high so i got like a mm of hang over at the top. I tried a razor to get it off, that only helped a littl. Well tell me how your install when.
                          Check out my cardomain site!<br /><a href=\"http://members.cardomain.com/99pewterv6\" target=\"_blank\">My Car</a>

                          Comment


                          • #28
                            I didn't get the mirror, hood or fender. Just the nose, the parking light, fog light, gfx. The GFX on the frt bottom gets the most chips, then the bumper cover. The hood is too hard to deal with cuz it's not the tip that gets chipped, it's the middle area. I just installed the left GFX piece, did it a lot better this time, more neat. I got the frt repainted a couple months ago, can't stand to have it start chipping again, even though it has.
                            I think it was easier to install the 2nd one becuz I cut the back to the edge of the sticker to match the body. So that is what I'm going to do b4 I install that piece around the Daytime Running lights. If there is a lot of bulge, I'm going to cut it up into a 2 or even a 3 piece.
                            1999 Pewter Camaro M5<br />Y87 Performance Package, Sport Appearance Package, Diamond Clears<br />Factory SS Hood, Free Ram Air Mod, Whisper Lid w/ K&N Air Filter<br />CarSound Cat 94009, B&B Tri-Flo w/ Quad Tips<br />BMR SFC, BMR STB, KVR Blank Rotors, Hawk HPS Pads<br />Black Painted Calipers w/ CAMARO Decal, 245/50 Dunlop SP Sport 5000<br />20% Rear 35% Side Tint, Red Reflective Inlays, Invincishield<br /><b>Young girls avert their eyes, weak men tremble, Ford dealers faint.</b>

                            Comment

                            Latest Topics

                            Collapse

                            FORUM SPONSORS

                            Collapse
                            Working...
                            X