I didnt believe it until i tried it.
My fiance's eclipse GT recently got a nice couple of dings despite our best efforts to avoid them. We considered paintless dent removal, but I saw a couple of positive reviews for the ding king online, and i figured what the heck. for 15 bucks or so off ebay it was worth a shot.
Here are my results:
the before picture:
http://s65.photobucket.com/albums/h2...t=6f6750ac.jpg
you can see two dings in this picture. the one just behind the door handle is the one i had high hopes for. i tried it on the one over the wheel, and had some success, but just as the ding king claims, it will not remove dents near the edge of panels, so it is still visable.
I followed the directions included perfectly. I let the glue warm up for 5 min, stuck it on the dent (used the smaller pad) and let it cool for 5 minutes. Then, i just twisted at an even pace. Suddenly i heard what sounded like a hammer hitting the sheetmetal, and the pad popped off. I didnt think anything had happened, but to my suprise most of the dent was gone.
Have a look:
http://i65.photobucket.com/albums/h2...8/000_0249.jpg
http://i65.photobucket.com/albums/h2...8/000_0248.jpg
I constantly hear people make fun of these things, saying theyll never work, but for 20 bucks, i thought it was worth a shot. Im glad we tried it, and i'd recommend it if you have a small ding (not crease) on a relatively flat part of the car not near the end of a panel.
My fiance's eclipse GT recently got a nice couple of dings despite our best efforts to avoid them. We considered paintless dent removal, but I saw a couple of positive reviews for the ding king online, and i figured what the heck. for 15 bucks or so off ebay it was worth a shot.
Here are my results:
the before picture:
http://s65.photobucket.com/albums/h2...t=6f6750ac.jpg
you can see two dings in this picture. the one just behind the door handle is the one i had high hopes for. i tried it on the one over the wheel, and had some success, but just as the ding king claims, it will not remove dents near the edge of panels, so it is still visable.
I followed the directions included perfectly. I let the glue warm up for 5 min, stuck it on the dent (used the smaller pad) and let it cool for 5 minutes. Then, i just twisted at an even pace. Suddenly i heard what sounded like a hammer hitting the sheetmetal, and the pad popped off. I didnt think anything had happened, but to my suprise most of the dent was gone.
Have a look:
http://i65.photobucket.com/albums/h2...8/000_0249.jpg
http://i65.photobucket.com/albums/h2...8/000_0248.jpg
I constantly hear people make fun of these things, saying theyll never work, but for 20 bucks, i thought it was worth a shot. Im glad we tried it, and i'd recommend it if you have a small ding (not crease) on a relatively flat part of the car not near the end of a panel.
Comment