W68 front GFX question

[Everglades W68]

The inside front edge of the passenger side GFX piece is ever so slightly separating from the front of the car (about 1/16" and only on the very end of the pointed part) (the part that is almost touching the flag in my sig pic, below).

I presume it is from years of "Smokey and the Bandit" manuevers (careening around corners, going over railroad tracks at high speeds, unpaved roads, etc) from me, so that is not bad for 114K miles.

Any suggestions on how to get it back to perfect again?

[Fbody3400]

Re: W68 front GFX question

3M Tape?

Or!! More Bandit manuevers!! :banana:

[Everglades W68]

Re: W68 front GFX question

3M Tape?

[MY REPLY]I dunno how well it might work...

Or!! More Bandit manuevers!! :banana:

DEFINITELY!!! Yeehaw! :burn: :rock:

['97RedBird]

Re: W68 front GFX question

Mines messed up as well but in a different spot. The passenger side right at the end of it one of the pins that holds it in is missing so its twisting out to the right. If I were you I'd check to see if all of the pins were there and see if you can replace one if its missing.