cant get the door panels off!!! - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

cant get the door panels off!!!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • cant get the door panels off!!!

    ok, when i bought the car, the front speakers n the doors wouldnt work, so i had 2 fade the sound 2 the ones n the rear... this worked fine until it came time 2 replace the front ones...

    i took off evry bolt that i can find, and the only thing that seems 2 still b holding the door on is the manual window handel... WHERE THE HECK DO I GO FROM HERE 2 GET THE D**N DOOR PANEL OFF???!!! im sure its sumthn stupid im missing, but what???

  • #2
    Re: cant get the door panels off!!!

    Use a flat tip screwdriver and gently pry it open

    Comment


    • #3
      Re: cant get the door panels off!!!

      Originally posted by woswill
      Use a flat tip screwdriver and gently pry it open



      the area where the manual handle is on the door? what will it do slide out? i dont wanna break nethn...

      Comment


      • #4
        Re: cant get the door panels off!!!

        Originally posted by oakleyR97S
        the area where the manual handle is on the door? what will it do slide out? i dont wanna break nethn...
        Not really familiar with manual handles, double check to see if theres any screws or anything and see if the handle itself screws off

        Comment


        • #5
          Re: cant get the door panels off!!!

          Use a screw driver and pry the handle off like said. It should just be held on by a retaining clip that's gonna be a big PITA to get back on once you get the door back together :D
          ~97 3.8L V6 Camaro~
          A few things

          Only Member of Team Hooker?!?

          Comment


          • #6
            Re: cant get the door panels off!!!

            Yeah there is a C-clip holding the window crank in. You should be able to see it. Easiest thing to do is position the crank to where the clamp is upside down and then just push it out. Careful not to lose it. The crank will slide right off. Similar to the automatic shift knob.
            1998 Camaro V6 \"Black Mamba\"<br />Y87<br />Whisper Lid w/ K&N filter<br />Flowmaster American Thunder<br />Numerous appearance mods.<br /> <a href=\"http://www.cardomain.com/ride/2154172\" target=\"_blank\">Car Domain</a>

            Comment


            • #7
              Re: cant get the door panels off!!!

              thanx, i'll c what i can do... this is gunna drive me nuts man...

              Comment


              • #8
                Re: cant get the door panels off!!!

                Push the clip out with a flat head screwdriver. Thats the easiest way. Your local carparts store will have a tool for removing them, but its unnecessary. A flathead works fine.
                2000 v6 a4 Camaro

                Comment


                • #9
                  Re: cant get the door panels off!!!

                  i think the easiest way is to shimmy a rag behind the handle and lift up to pop the clip out. before you put the handle back on put the clip on the handle and jam it on.

                  Comment

                  Latest Topics

                  Collapse

                  There are no results that meet this criteria.

                  FORUM SPONSORS

                  Collapse
                  Working...
                  X