fog lights

[v6bird95]

anybody know where i can get some fog lights that will fit in the front air dam thingys of the bumper of a 1995 firebird?

[UDLOSE98]

Re: fog lights

ebay it

[v6bird95]

Re: fog lights

yea i tried that but i cant really find anything for my year

[TheGr8Schlotzky]

Re: fog lights

i think greenmachine has got some. wait for him to chime in.

[96greenmachine]

Re: fog lights

well all i did was buy basic Pilot fogs from autozone...took the black covers off and snugged them in...might have to do some trimming to the bumper but it will look ok once u get them in...try not to cut to much though or u'll have to figure out how to keep them in. mine are snugged in w/out anything really holding them other then the holes there in...

[v6bird95]

Re: fog lights

ok thanks alot. do you know what the size of them were?

[FirebirdGT]

Re: fog lights

email horsepower1@foundadeal.com

ask about:

GM Fog Light Package Kit SLP Firehawk

This is what I have.

This what they look like: http://www.fbodymotorsports.com/jay_s_94_formula

[96greenmachine]

Re: fog lights

no dont really know the size...just look for fogs by "Pilot" its a yellow/white and black box you'll see them...nothing special about them no special colors or anything just clear...

[v6bird95]

Re: fog lights

allrite

[bird of fire]

Re: fog lights

how do you get those black covers off?

[turbohead2332]

Re: fog lights

well all i did was buy basic Pilot fogs from autozone...took the black covers off and snugged them in...might have to do some trimming to the bumper but it will look ok once u get them in...try not to cut to much though or u'll have to figure out how to keep them in. mine are snugged in w/out anything really holding them other then the holes there in...

Hey! That's what I have! One of mine is a bit crooked though. It wasn't easy getting them in, but it wasn't hard. The bracket screwed into the bottom of where the stock brackets are. I had to screw em in by hand with just an adapter and a phillips head point. lol. I ended up with blisters. I have since straightened it out. What you have to do to get them to fit right and point straight is to cut a notch out of the small lip in the back. Check them out. (One is still crooked in these pics.)

[blindeyed]

Re: fog lights

You can buy them here:
http://www.hawksthirdgenparts.com/in...ROD&ProdID=389

Designed to fit perfectly where the black oval pieces are. Here's what they look like on mine: