just got my clear corners in today, the front ones, before doing the install i was wondering if i could get some tips from anybody who's done them before on a 93-97 firebird. I see there is some room to reach my hand when the headlights are up, but i don't know if that's enough room. Should i go from under the car? What tools do i need? any help would be appreciated since there are no instructions. thank u
Announcement
Collapse
No announcement yet.
93-97 firebird clear corner install
Collapse
X
-
Re: 93-97 firebird clear corner install
If you've got skinny arms, put the headlights up manually and snake your arm in there, 3 screws hold them in place.1994 Firebird 3.4<br />15.65 @ 86.8<br /><a href=\"http://www.funkz.net/firebird.htm\" target=\"_blank\">funkz.net/firebird</a><br /><a href=\"http://mywebpages.comcast.net/funkz/timeslips.htm\" target=\"_blank\">Timeslips</a>
Comment
-
Re: 93-97 firebird clear corner install
Originally posted by FunkZIf you've got skinny arms, put the headlights up manually and snake your arm in there, 3 screws hold them in place.---Niño---<br /><i>95\' silver 5 spd</i>
Comment
-
Re: 93-97 firebird clear corner install
Originally posted by FunkZIf you've got skinny arms, put the headlights up manually and snake your arm in there, 3 screws hold them in place.
i think i'll try that before i take off the wind panel, however i imagine it would be difficult to replace the bulbs and but the screws back in , btw do you use the old screws to mount the new light? And my set came with oarnge lights, should i use these?
thanx for the help so far
max
Comment
-
Re: 93-97 firebird clear corner install
the orange bulbs i got w/ mine didn't fit. i installed my corners from underneath w/o raising the front end. it took a lot longer than it needed to w/ limited space. its not hard to do, its just a process.94 Firebird - Red A4<br /> <a href=\"http://members.cardomain.com/predatorbird\" target=\"_blank\">http://members.cardomain.com/predatorbird</a>
Comment
-
Re: 93-97 firebird clear corner install
install is done fellas, did it all from above the car with my headlights in the up position, however my arms are shredded as there is little space to manuever. However they look good and it only took me 2 hours (not bad i suppose) thanx for all the help, and i used a 9/32 socket cuz i don't have metric =)
Comment
Latest Topics
Collapse
-
by RPDRed6Up for sale is my 2001 Chevrolet Camaro 3.8 in need of some TLC and help. I’ve owned this vehicle the past 18 years (since 2006) and it’s been very...2 weeks ago
-
by ssms5411So went out to start the Camaro and no start, batteries are good just hear a thud sound, started up fine last Friday. Check the fuses and the battery...2 weeks ago
-
Working on getting my 99 Camaro back in action. Long story short, got parked in the garage about 5 years ago (kids, career stuff ect.) trying to get her...2 weeks ago
-
by AZ3.8CamaroI have a 15 year boy now (crazy how time flies from when I was a teenager on here!) and his first car will be the old Camaro.
I stopped driving...2 weeks ago -
Well, I finally am getting some time to get back into these cars. Today I installed a set of no name eBay stainless headers that I’ve had for probably...4 weeks ago
Comment