Installing Rear Panel Graphics Help Please - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

Installing Rear Panel Graphics Help Please

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Installing Rear Panel Graphics Help Please

    Ok well finnally i just got my "Firebird" and firebird symbol in white for my rear black panel in between my tail lights. what way would u guys recoomend in cleaning up the black panel before i go for the install of these stickers.

    As you can see in one of the pics that i already used some rubbing alcohol to get the old sticker part off,(the "firebird" was the same color as the symbol) but u can still see where the sticker is supposed to go.


    I was thinking about wet sanding the whole panel with some real find sand paper(like 2000+ grit) and then having a local tinting place buff it back out for free, since i know the owned and have gotten my tints done and redone many times. (get all the scratches out, for a nice and smooth black panel)

    And then applying my sexy white firebird graphics...



    any suggestions would greatly benefit me.
    Attached Files
    Last edited by Kronic Budz; 08-06-2007, 02:21 PM.

  • #2
    Re: Installing Rear Panel Graphics Help Please

    nevermind, i see how all you guys read my post and dont reply, i searched alittle on wet sandning and thats the route im taking.

    Ill post pictures of my updated ride tommorow.

    thanks

    Comment


    • #3
      Re: Installing Rear Panel Graphics Help Please

      Yeah, wetsanding then polishing out the haze is the way to go. That's what I did.

      Comment


      • #4
        Re: Installing Rear Panel Graphics Help Please

        my asvice would be start with some 800gritt and work your way up to 2000. then hit it with some meguiars plastic polish, and it will look like new
        1997 Camaro LS1 RS
        1994 Camaro - Sold
        1999 Trans am Vert - Sold

        A Few Mods....

        Comment


        • #5
          Re: Installing Rear Panel Graphics Help Please

          ok well i went and got some 1500 gritt sandpaper and did some passes on my black panel acouple of times to make sure i got it nice and even.

          A guy I know at a local tinting/detail shop buffed out my panel with 3 different kind of adhesives and it came out amazing!!Look like a mirror now and matches my tail light covers which is dope.

          I just finished getting the graphics on and i got them on perfect, happy about that.


          I will post pictures tommorow of my car after it gets a wash since its dirty as satins rectum.

          peace out

          Going to go blaze now.

          Comment

          Latest Topics

          Collapse

          • Andy H
            Transmission removal help!!
            by Andy H
            Hey everyone! I've been trying to remove my transmission for two days now! I need to replace the clutch. Only thing I've got left holding the transmission...
            2 weeks ago
          • 2.8 Bird
            Abs inop
            by 2.8 Bird
            Hello, so I changed the front bearings on the bird and the ABS inoperative light came on. I made a mistake of not removing negative battery cable. Now...
            2 weeks ago
          • fishin
            Intermittent Headlight Function 97 Firebird
            by fishin
            I usually have to double, triple my headlight switch for them to come up on my 97 Firebird. I cleaned all connections. Could it be the headlight switch...
            3 weeks ago

          FORUM SPONSORS

          Collapse
          Working...
          X