applying grand sport stripes - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

applying grand sport stripes

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • applying grand sport stripes

    Anyone have any tips? I really don't want to mess up these stripes. I'm thinking warming the vinyl with a hair dryer or removing the backing so I can stretch it and avoid bubbles and such on the curve of the fenders. I already facked up one set and ordered a replacement, but from what I saw, I think it's gonna look really good once I get the stripes done right.

  • #2
    Re: applying grand sport stripes

    I don't know about the warming it up part. When I do vinyl, I make sure the surface is cool, I'm not in direct sun and I apply a ton of soapy water to all surfaces. After careful placement, I squeegee the water off and smooth it all out. Then... I let it sit in the sun.

    Lounge Moderator

    Comment


    • #3
      Re: applying grand sport stripes

      Alright, I think I'll skip the hair dryer part then. I'll see if I can get the remaining stripes on right tomorrow and shoot some pics. Might do the front inserts as well (waiting to paint the berger panel before I do rear inserts)

      Comment


      • #4
        Re: applying grand sport stripes

        Yeah... I would just keep the vinyl at room temp. I know it's probably pretty cold in Michigan right now. Ice cold vinyl can sometimes be problematic too.

        Lounge Moderator

        Comment


        • #5
          Re: applying grand sport stripes

          the best way i have found to do stripes is to get them warm and the surface cool and take your time that is the best advice i can give you i did some stripes at our shop on an new Cummins Diesel. all i got to say is wow that sux one side way a bad shot but the passenger side was alot better when i slowed down. so take your time, do it in a controled place and get plenty of soappy water! good luck

          Comment


          • #6
            Re: applying grand sport stripes

            You have to wet both surfaces with soapy water, apply, and then squeegee out!
            2004 CE Corvette 10.86@132mph
            1996 Supercharged/Nitrous Camaro RS (For Sale)
            2011 Cadillac CTS-V
            2011 Mitsubishi Eclipse Spyder GT-P
            2006 Mitsubishi Eclipse GS

            Comment


            • #7
              Re: applying grand sport stripes

              ... how effective will soapy water be in 30 degree weather? I don't want it to freeze on contact like my QD spray was.

              Comment


              • #8
                Re: applying grand sport stripes

                Probably not so good. You're not suppose to apply vinyl in such cold temps. You should wait til it's like in the 50's or warmer so that the heat from the sun can set the glue. Only other option, would be to apply them in a heated garage and let them set or use a heat gun.
                2004 CE Corvette 10.86@132mph
                1996 Supercharged/Nitrous Camaro RS (For Sale)
                2011 Cadillac CTS-V
                2011 Mitsubishi Eclipse Spyder GT-P
                2006 Mitsubishi Eclipse GS

                Comment


                • #9
                  Re: applying grand sport stripes

                  I would just wait for the spring or do it in a heated garage.
                  Also you will need to remove the wax and clean the surface.

                  -Y87
                  Lid,K&N Filter,PaceSetter Headers,Magnaflow Cat 2.5in S-pipe,Flomaster :(,3.42 LSD

                  Comment


                  • #10
                    Re: applying grand sport stripes

                    Ugh, not what I wanted to hear... so heat after all? I think I'll go for it again tomorrow, learn from my mistakes, and work over the stripes with a hair dryer after I get them set. Do you think that would be good enough? It will just kill me if I have to wait real long to get these things on now that I've seen how it looks.

                    Comment


                    • #11
                      Re: applying grand sport stripes

                      Patience is a virtue. And it pays off. But do what you wish, heh its not my wallet.

                      TEAM C6V6

                      Comment


                      • #12
                        Re: applying grand sport stripes

                        its not that hard to do...takes all of 5 mins...its not brain surgery...put it where u want them and then stick em on


                        87 Firebird RIP
                        96 Camaro RS RIP
                        94 Patriot Red 1LE Z28 - Sold
                        02 WS6 TA - Sold

                        Comment


                        • #13
                          Re: applying grand sport stripes

                          Originally posted by SilverRS96
                          its not that hard to do...takes all of 5 mins...its not brain surgery...put it where u want them and then stick em on
                          actually, the compound angles on the fender DO make it hard to do. If you just "put it where u want them and stick em on," I promise that you'll have a dozen seams and bubbles.

                          Do what the others said..wait till it's warmer, or find a warm place, and use soapy water and a squeegee

                          Comment


                          • #14
                            Re: applying grand sport stripes

                            well then i must b god cuz i dont have any seams or bubbles on mine...if u put it on and b careful yes it will come out right...if ur careless it will come out like ****...


                            87 Firebird RIP
                            96 Camaro RS RIP
                            94 Patriot Red 1LE Z28 - Sold
                            02 WS6 TA - Sold

                            Comment


                            • #15
                              Re: applying grand sport stripes

                              I got the driver side on and it looks awesome! I'm so glad I went flat black, it looks like a phantom stripe, very subtle, but sets it apart from the rest. I'll try to get some pictures up pretty quick, but I'm not sure if you can really see them in any lol.

                              Comment

                              Latest Topics

                              Collapse

                              • Andy H
                                Transmission removal help!!
                                by Andy H
                                Hey everyone! I've been trying to remove my transmission for two days now! I need to replace the clutch. Only thing I've got left holding the transmission...
                                2 weeks ago
                              • 2.8 Bird
                                Abs inop
                                by 2.8 Bird
                                Hello, so I changed the front bearings on the bird and the ABS inoperative light came on. I made a mistake of not removing negative battery cable. Now...
                                2 weeks ago
                              • fishin
                                Intermittent Headlight Function 97 Firebird
                                by fishin
                                I usually have to double, triple my headlight switch for them to come up on my 97 Firebird. I cleaned all connections. Could it be the headlight switch...
                                3 weeks ago

                              FORUM SPONSORS

                              Collapse
                              Working...
                              X