Takeing Sail pannel and molding off and back on

[niik000]

If I take my sail pannels and side molding off to paint, what do I use to put it back on? I may just leave the molding off if it looks ok under it.

[Firebirdkid96]

Re: Takeing Sail pannel and molding off and back on

what side molding?? Do you mean the kick panels?

They come of and go on using philips head screws... 4 on the passenger side, and 5 on the drivers side.

The sail panels go on with one clip in the coat hanger, two screws up top on the t-bar if you have them, and some industrial grade velcro that you won't need to replace. Just using a small flathead to pop the clip out of the coat hanger, open your t-tops, unscrew both philips head screws on the rear edge, and then pull the sail panels off.

all of this has to be done after you've removed your seats. Front ones at least.

[niik000]

Re: Takeing Sail pannel and molding off and back on

I think were talking about different parts, I'm talking about the stuff on the sides that goes across from one wheel well to the other, and the little triangle thing behind the windows, I think they both go on with adhesive

[Firebirdkid96]

Re: Takeing Sail pannel and molding off and back on

In the door jam? The triangle thing by the windows are held on with one screw and industrial velcro...

Are you talking exterior?

[Mr. Logger]

Re: Takeing Sail pannel and molding off and back on

The molding he's talking about, is the side molding that goes from the back of the front wheel well, over the door, all the way to the front of the rear wheel well.

[niik000]

Re: Takeing Sail pannel and molding off and back on

yah. it's on with adhesive tape, i wanna take it off but for all i know my car used to be bright ornge and who ever painted it left the molding on, and i don't know what to use to put it back on.

[Firebirdkid96]

Re: Takeing Sail pannel and molding off and back on

ohhhhh. My bad. 3M Makes an industrial strength double side adhesive tape that you can get at Advance Auto. Holds forever. Literally.

[niik000]

Re: Takeing Sail pannel and molding off and back on

cool, thanks.

[Archer]

Re: Takeing Sail pannel and molding off and back on

just make sure ITS TOTALLY CLEAN! lol any dirt, moisture will LITERALLY make it degrade and fall apart. It sucks. lol Other than that, its great stuff.
Archer

[niik000]

Re: Takeing Sail pannel and molding off and back on

It will be bacause I'm gonna try any buff the aria out to see how it looks. I think someone may have painted over them but did a poor job but ill find out soon enoughf