Tweet
So Im thinking of applying rubbing compound, then a polishing compound to the entire car since I have millions of little scratches and what not everywhere and apparently waxing isnt getting rid of them...I read in some posts that some people think that this damages the clear coat....is it really bad if I go ahead and do this?
-
2002 SOM Z28 Camaro - 12.9 @ 104 mph
1996 3800 Camaro - 13.43 @ 100.77 mph
Project Cars | How To Guides | Scratch Repair | Synthetic Oil -
Re: rubbing compound
I'd take some Meguiars Swirl Remover 2.0 to it. The stuff is amazing. In the same line, Meguiars has different formulas for different levels of scratching. Personally I wouldn't take rubbing compound to anything unless it's beyond terrible, or after being sanded. -
Re: rubbing compound
I have put that stuff on...no avail...its not terrible but I wanna clean the car up a lil
2002 SOM Z28 Camaro - 12.9 @ 104 mph
1996 3800 Camaro - 13.43 @ 100.77 mph
Project Cars | How To Guides | Scratch Repair | Synthetic OilComment
-
Re: rubbing compound
apply bufflight then power polish.. then use Meguiars scratch X.... repeat until scratches are gone... make sure you have bufflight or scratch X before using a power polish...
Horsepower is how fast you hit the Minivan... Torque is how far you take the Minivan with you... :wavey:
Originally posted by Firehawk N WvComment
-
Re: rubbing compound
whats bufflight? and what would be a power polish?
2002 SOM Z28 Camaro - 12.9 @ 104 mph
1996 3800 Camaro - 13.43 @ 100.77 mph
Project Cars | How To Guides | Scratch Repair | Synthetic OilComment
-
Re: rubbing compound
If you don't have a buffer you probably won't be able to take out many scratches. Mequiars Scratch-X can be used by hand to removed some defects, but it's a workout to get any results. I wouldn't want to use it on a whole car.
Comment
-
Re: rubbing compound
bufflight is an industrial brand for car polish.... and yes you need a power polish if you want great results... because even with power polish... takes me three rounds before the scratches go away... i use the Scratch X on the whole car.. its a matter of patience... if you really want that showroom shine.... lol besides i dont have a choice... its my job...
heres a power polish
Last edited by Byrd14; 04-17-2008, 08:22 AM.
Horsepower is how fast you hit the Minivan... Torque is how far you take the Minivan with you... :wavey:
Originally posted by Firehawk N WvComment
-
Re: rubbing compound
O got it...I have a cheap one...So what I use scratch X then a polishing compound?...repeat until they are gone...then rewax the car?
2002 SOM Z28 Camaro - 12.9 @ 104 mph
1996 3800 Camaro - 13.43 @ 100.77 mph
Project Cars | How To Guides | Scratch Repair | Synthetic OilComment
-
Re: rubbing compound
about how much are those?Originally posted by Byrd14 View Postbufflight is an industrial brand for car polish.... and yes you need a power polish if you want great results... because even with power polish... takes me three rounds before the scratches go away... i use the Scratch X on the whole car.. its a matter of patience... if you really want that showroom shine.... lol besides i dont have a choice... its my job...
heres a power polishComment
-
Re: rubbing compound
somebody power polished my car before I owned it and did a crap job. can't tell much though, because its black.Comment
-
Re: rubbing compound
Did you just say you can't tell they did a crappy job because it's black? What kind of black are you talking about? flat? Because black shows everything.Comment
-
Re: rubbing compound
yea thats why I need wanna fix the scratches cause its on a black car...Im confused to...Black shows absolutly everything
2002 SOM Z28 Camaro - 12.9 @ 104 mph
1996 3800 Camaro - 13.43 @ 100.77 mph
Project Cars | How To Guides | Scratch Repair | Synthetic OilComment
-
Re: rubbing compound
Polishing compound is really not a polish, it's a minor abrasive, more so than the meguiars swirl remover, but you still won't have to worry so much about eating through your paint. So you might try some polishing compound and see how it comes out.Comment
-
Re: rubbing compound
so should I strip the wax...use scratch X 2 or 3 times depending on the results....use polishing compound, then polish, then go into the mothers wax 3 step thing? lol
2002 SOM Z28 Camaro - 12.9 @ 104 mph
1996 3800 Camaro - 13.43 @ 100.77 mph
Project Cars | How To Guides | Scratch Repair | Synthetic OilComment
-
Re: rubbing compound
You don't need to strip the wax or anything. Rubbing compoung, polishing compound, ScratchX, Meguiar's Paint cleaner(step1 out of 3 step system), they are all the same thing, just different degree of abrasiveness. Like different grit sand paper. As you work into it, it starts dissolving.
If it was my car I would
1) wash/dry the car
2) Clay the car
3) start off with the least abrasive cleaner, then move up.
In my experience Meguiar's step1 is on the low side, polising compound a little more abrasive and rubbing compound even more abrasive. I haven't tried Scratch X as "step 1" and Turtle Wax's Polishing compound is all I have needed so far. If you are using the stronger one's becareful on edges.
You can also replace 3) up there with a "Cleaner/Wax" to see what affect it has first. This Cleaner/wax comes with the clay bar(~$18).1999 Pewter Camaro M5<br />Y87 Performance Package, Sport Appearance Package, Diamond Clears<br />Factory SS Hood, Free Ram Air Mod, Whisper Lid w/ K&N Air Filter<br />CarSound Cat 94009, B&B Tri-Flo w/ Quad Tips<br />BMR SFC, BMR STB, KVR Blank Rotors, Hawk HPS Pads<br />Black Painted Calipers w/ CAMARO Decal, 245/50 Dunlop SP Sport 5000<br />20% Rear 35% Side Tint, Red Reflective Inlays, Invincishield<br /><b>Young girls avert their eyes, weak men tremble, Ford dealers faint.</b>Comment
-
Hey everyone! I've been trying to remove my transmission for two days now! I need to replace the clutch. Only thing I've got left holding the transmission...2 weeks ago -
Hello, so I changed the front bearings on the bird and the ABS inoperative light came on. I made a mistake of not removing negative battery cable. Now...2 weeks ago -
I usually have to double, triple my headlight switch for them to come up on my 97 Firebird. I cleaned all connections. Could it be the headlight switch...3 weeks ago
Comment