Tweet
i know alot of you are going to say search; i did, and can't seem to find an answer. I found a deal on a 99 LS1 cluster, and I want to put it in my 97. First off, this is not so I can make it look faster; I want the cluster because there are more overlays for the V8's then for the 6's. I want the black overlays with flames, but for 6's i can only find indiglo gauges. So, I've read that the speedo will be right, but the tach off. You can fix that by buying a part for $100, or by swapping a resistor. Can someone tell me where this resistor is, and if the 99 cluster will swap in fine.
-
~97 3.8L V6 Camaro~
A few things
Only Member of Team Hooker?!? -
Re: Cluster Swap
Don't know, however iirc, the oil pressure gauge is different on the V8s... -
Re: Cluster Swap
seeing as how the 97 and 99 cluster design is the same, they should swap fine. dunno where the resister is tho, so my post is pretty much useless :(Comment
-
Hey everyone! I've been trying to remove my transmission for two days now! I need to replace the clutch. Only thing I've got left holding the transmission...2 weeks ago -
Hello, so I changed the front bearings on the bird and the ABS inoperative light came on. I made a mistake of not removing negative battery cable. Now...2 weeks ago -
I usually have to double, triple my headlight switch for them to come up on my 97 Firebird. I cleaned all connections. Could it be the headlight switch...3 weeks ago
Comment