Tweet
Ive been thinking about changing out the lights in the gauge cluster to blue LEDs. I know that the bulbs are 194s. Since the gauges right now glow red but the bulbs that are in the cluster are clear, i was wondering if there is a red film or something in the cluster to cause them to glow red or if i could just swap out the clear 194s with blue LEDs to get the gauges to glow blue instead of red. I was also wondering if this would apply to the AC panel and the headlight control panel too.
-
-
Re: LED Gauge Cluster
If you have a firebird it has red film on all interior panels. All the bulbs are not 194s you have a couple of different ones for the door panels and the headlight switch. also if you take the needles off gauge cluster to get the film off you're gauges will lose calibration.Originally posted by murphy5587 View Post -
Re: LED Gauge Cluster
Alright thanks, thats kinda what i figured about the film. And yes i do have a Firebird. So if i was to go about taking the film off, is there any way to get the gauges recalibrated?Comment
-
Re: LED Gauge Cluster
I don't know of any place that can recalibrate the gauges. You can get them back pretty close.Originally posted by murphy5587 View Post
This link will show what bulbs you will need if you go through with it. I have the bulbs from superbright and some of them blink.
http://www.keliente.com/LED.htm
I got the film off, and did blue LEDs. if you want to see pics go to my fquick.Comment
-
Hey everyone! I've been trying to remove my transmission for two days now! I need to replace the clutch. Only thing I've got left holding the transmission...2 weeks ago -
Hello, so I changed the front bearings on the bird and the ABS inoperative light came on. I made a mistake of not removing negative battery cable. Now...2 weeks ago -
I usually have to double, triple my headlight switch for them to come up on my 97 Firebird. I cleaned all connections. Could it be the headlight switch...3 weeks ago
Comment