Mods for Camaro - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

Mods for Camaro

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Mods for Camaro

    hey all i was just wondering if someone could either redirect me to another thread that has websites for modifications for 4th gen camaros or if you could just send some to me on this one, your help would be much appreciated thanks:)

  • #2
    Re: Mods for Camaro

    http://www.bfranker.badz28.com/appearance/

    Comment


    • #3
      Re: Mods for Camaro

      so i dont start a new thread, has anyone put 18" 19" vette wheels on a f car?
      Team NoVa

      2000 Firebird- Intake, Pacesetters, !cat, full 2.5 to flowcrapster, 1.9 rockers, LS6 springs and Intense modded retainers, WS6 speedlines, T/A bumpers and hatch, 5 spd swapped, SOON TO BE nitrous'd and cammed.

      Comment


      • #4
        Re: Mods for Camaro

        i don't think that you should go over 17's alot of people will agree. 18's are pushing it. and 19's are just bad.
        WAWA-A-HOLIC

        Comment


        • #5
          Re: Mods for Camaro

          I actually have I have 18" x 9.5" replica c6 corvette rims on mine

          looks like this

          Comment


          • #6
            Re: Mods for Camaro

            Ive seen tons of 18" vette wheels on fbodies, I like the z06s

            Comment


            • #7
              Re: Mods for Camaro

              Originally posted by kristen View Post
              i don't think that you should go over 17's alot of people will agree. 18's are pushing it. and 19's are just bad.
              I agree but I do remember seeing a bird a while back that had deep dish 19s that he somehow pulled off quite nicely. The bird had thousands and thousands into it though, on a normal car, no 19s will look good imo.
              sigpic
              1996 Chevrolet Camaro
              1995 Buick Park Avenue Ultra
              --Appearance Moderator--

              Comment


              • #8
                Re: Mods for Camaro

                I agree on the 19s I dont think I would like them, but 18s are good for me they look really good from afar

                Comment


                • #9
                  Re: Mods for Camaro

                  so like the 17" 18" would be the best bet? i have 17 on it right now, but the offset is retarded and i scrub tire on the rear all the time. i bought the rims when i was younger and more retardeder (still a little retarded if you cant tell, lol).

                  do the 18s ever give you a problem with scrubbing or do they tuck up in the fender nice?
                  Team NoVa

                  2000 Firebird- Intake, Pacesetters, !cat, full 2.5 to flowcrapster, 1.9 rockers, LS6 springs and Intense modded retainers, WS6 speedlines, T/A bumpers and hatch, 5 spd swapped, SOON TO BE nitrous'd and cammed.

                  Comment


                  • #10
                    Re: Mods for Camaro

                    Depends on the offset and rim width; if you stick with stock offset (+45, IIRC) and stock rim width (8"), then you shouldn't have any problems with scrubbing, etc if you keep the tire size close to stock as well. But, if you do that, then it takes away the point of getting rims, IMO :P
                    ~97 3.8L V6 Camaro~
                    A few things

                    Only Member of Team Hooker?!?

                    Comment


                    • #11
                      Re: Mods for Camaro

                      Originally posted by RadRacer View Post
                      Depends on the offset and rim width; if you stick with stock offset (+45, IIRC) and stock rim width (8"), then you shouldn't have any problems with scrubbing, etc if you keep the tire size close to stock as well. But, if you do that, then it takes away the point of getting rims, IMO :P
                      well im talking bout the offset on vette rims...18 in thr rear.
                      Team NoVa

                      2000 Firebird- Intake, Pacesetters, !cat, full 2.5 to flowcrapster, 1.9 rockers, LS6 springs and Intense modded retainers, WS6 speedlines, T/A bumpers and hatch, 5 spd swapped, SOON TO BE nitrous'd and cammed.

                      Comment


                      • #12
                        Re: Mods for Camaro

                        again, depends on the width of the rims. Diameter really doesn't matter, so long as the tires are about the same size, which is done by changing profile relative to width.
                        sigpic
                        1996 Chevrolet Camaro
                        1995 Buick Park Avenue Ultra
                        --Appearance Moderator--

                        Comment

                        Latest Topics

                        Collapse

                        • Andy H
                          Transmission removal help!!
                          by Andy H
                          Hey everyone! I've been trying to remove my transmission for two days now! I need to replace the clutch. Only thing I've got left holding the transmission...
                          2 weeks ago
                        • 2.8 Bird
                          Abs inop
                          by 2.8 Bird
                          Hello, so I changed the front bearings on the bird and the ABS inoperative light came on. I made a mistake of not removing negative battery cable. Now...
                          3 weeks ago
                        • fishin
                          Intermittent Headlight Function 97 Firebird
                          by fishin
                          I usually have to double, triple my headlight switch for them to come up on my 97 Firebird. I cleaned all connections. Could it be the headlight switch...
                          3 weeks ago

                        FORUM SPONSORS

                        Collapse
                        Working...
                        X