Welcome to the FirebirdV6.com/CamaroV6.com forums.
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact contact us.
If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
18/10.5 in the back & 17/9.5 in the front c5 z06 rims. Should i have any problems with them bolting right on? will i need spacers or should i anticipate any scraping of the inside of the wheel wells in the back? ... keep in mind i just finished installing KYB adjustables w/hotchkis 1" lowering springs back and front.
I think they have the same bolt pattern tho. As far as tire rubbing; it probably won't but you might want to ask someone that has some Corvette wheels on their Camaro.
Running the same kyb agx and hotchkis. I'm also running 17/18 but my rears are 9.5" wide. As long as your offset is more than 56mm then you'll be fine. If it IS 56mm, I still think you'll be fine, as there was some clearance between the tires and the bumpstops. I did have to grind down just a bit of the hub and inside of the wheel to get it to clear, but that's just pre 98 cars, so you should be fine on that.
So 275/35/18 all around? Sweet deal. I had no problems with that size in the back, and the fronts are essentially the same size but for 17s. Will look real nice :tup:
So went out to start the Camaro and no start, batteries are good just hear a thud sound, started up fine last Friday. Check the fuses and the battery...
Working on getting my 99 Camaro back in action. Long story short, got parked in the garage about 5 years ago (kids, career stuff ect.) trying to get her...
Well, I finally am getting some time to get back into these cars. Today I installed a set of no name eBay stainless headers that I’ve had for probably...
I notice a lot of headlight assemblies on amazon for 1998-2002 but zero for 1997. Am I to assume it’s not possible to upgrade from my 4 rusted out light...
1 week ago
FORUM SPONSORS
Collapse
Working...
X
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Tweet
Comment