Berger Panel?

[96Cmaro]

I see it in pictures of Camaros on here every now and then and I personally think it looks tight as hell, I think it would look really good on my Red 96

now can someone give me some insight on how exactly you either get one or do it yourself?

[TheGr8Schlotzky]

Re: Berger Panel?

Take your panel off by removing the trunk panels and your tail lights, and getting the bolts from the inside, then surface sand yours and spray it black.

[truekoa]

Re: Berger Panel?

did a quick search:
http://forum.camarov6.com/showthread...t=berger+panel

this is the same guide i used when i painted mine.

removal is just open your hatch, remove the carpet molding and you'll see maybe 4 twist bolts, 2 on each tail light, remove those, take the tail light off and the bulbs/wiring, and the panel should come off.

[TheGr8Schlotzky]

Re: Berger Panel?

removal is just open your hatch, remove the carpet molding and you'll see maybe 4 twist bolts, 2 on each tail light, remove those, take the tail light off and the bulbs/wiring, and the panel should come off.

Not quite. You'll need to get the 10mm bolts off from the center area as well as the far edges below the tail lights. I think there are just the 4 bolts aside from the 4 wing nuts for the tail lights.

[96Cmaro]

Re: Berger Panel?

word appreciate it guys, once i finally get all the stuff ill probably end up doing it before i go back to college

thanks again

[savagecamaro96]

Re: Berger Panel?

do it and post pics so maybe i can get some motivation to do it on my red 96.

[pace2006]

Re: Berger Panel?

Do yourself a favor and get a spare panel to paint. Just in case you decide you want the stock one back on at some point down the road.

[truekoa]

Re: Berger Panel?

Not quite. You'll need to get the 10mm bolts off from the center area as well as the far edges below the tail lights. I think there are just the 4 bolts aside from the 4 wing nuts for the tail lights.

oh my bad, just typed what I remembered off the top of my head.

[solocamaro95]

Re: Berger Panel?

X2 i got a spare one for $25 and paint about 10 or so with clear i love it you should do on a red car it will set it off

[sceneiskeen]

Re: Berger Panel?

Take it out and fill in the camaro letters and the spot for the keyhole

[savagecamaro96]

Re: Berger Panel?

Take it out and fill in the camaro letters and the spot for the keyhole

keyhole, ok, but you gotta have the letters man.

[96Cmaro]

Re: Berger Panel?

haha i would do that but the trunk release in my dash is messed up so i would never be able to open it again :(

but i would have to agree on the separate panel makes sense just incase i severely mess up and no worries I plan on doing it sometime before september ill have some pics up so you can see if you want to do it or not

[sceneiskeen]

Re: Berger Panel?

keyhole, ok, but you gotta have the letters man.

i think its perfect the way it is, if you dont know what kind of car it is, dont worry about it.


and its not like i need it, i know what it is.

[96Cmaro]

Re: Berger Panel?

hey scene what kind of paint did you use when you painted your panel?

[sceneiskeen]

Re: Berger Panel?

Mine was professionaly painted when the car was repainted.

so was the roof, the sail panel, the mirrors, the front of the grill, and the headlight area.