2800-3200 stall converter?

[01PewterDropTop]

I cant even find any torque converters for the V6 on the sites that sell performance parts for our cars. anyone know where i can get a 2800-3200 stall at?

[97rs4life]

Re: 2800-3200 stall converter?

PI and TCI sell converters for our cars. Or you can get your stocker reworked to stall higher as well.

[pace2006]

Re: 2800-3200 stall converter?

An OEM 4x4 S-10 torque converter will drop right in and stall upwards of 3200 rpms. You can find a new or reman between $80-130. Check this thread for more info.

[ssms5411]

Re: 2800-3200 stall converter?

I can give you the phone # to the place that makes 9.5 " stalls for our cars that start at $230 and with upgrades $290 without shipping 1 year warranty , plus you can pick you STR which is great. Also depends if you are staying N/A or going FI. S-10 2.2 4 cyl. will work but you don't know how much HP it will take this place that makes them in their own machine shop so thy keep the cost down on them, they say they use same parts as TCI and Yank, they will ask how much HP , like mine I told them maybe 550 HP and they go by that , but their all 9.5" billet converters which you'll save 10-15LBS over a 12" converter also, less rotating mass, I was going to go with a S-10 before I found this place. A 3000 stall you can get a 2.0 STR and 3200 you can get a 2.2 STR , 3500 ,2.5 STR , PM me and I will give you their phone #.

[LETZRIDE]

Re: 2800-3200 stall converter?

www.abbottracingheads.com Thats where I got my 3200 stall from, it is a TCI and I did a custom stall through abbott to 3200...I wish I hadda went with 3500-4000 now though...

[ssms5411]

Re: 2800-3200 stall converter?

www.abbottracingheads.com Thats where I got my 3200 stall from, it is a TCI and I did a custom stall through abbott to 3200...I wish I hadda went with 3500-4000 now though...

Just switch gears to 4.10's or I can give you the # for the shop here to make you a stall.

[LETZRIDE]

Re: 2800-3200 stall converter?

Just switch gears to 4.10's or I can give you the # for the shop here to make you a stall.

4.10's doesnt give you an str of over 2.0...neither does the stock s10 stall I dont think...you would have to look into those numbers...str is really the main reason why you buy a stall...

[pace2006]

Re: 2800-3200 stall converter?

4.10's doesnt give you an str of over 2.0...neither does the stock s10 stall I dont think...you would have to look into those numbers...str is really the main reason why you buy a stall...

Correct. The S-10 stall is good for those that want the OEM characteristics with a higher stall, at the cost of a little extra slipping. For someone wanting a performance stall, aftermarket is the way to go.