Does anyone have any pics of where in the transmission the TCC solenoid is located. I am throwing the 1860 code saying it needs to be replaced. Any link to website or maneull to do this repair?
Announcement
Collapse
No announcement yet.
TCC solenoid question
Collapse
X
-
Re: TCC solenoid question
Its actually a 1870 code, you can go with a Trans Go shift kit that would fix or and give you some great firmer shifts or this place which half way down should have it for $20. But if your going to go in might as well do a shift kit and enjoy it the firmer shifts since you have to go in anyways.
http://www.transmissioncenter.net/4l60e.htm08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine
-
Re: TCC solenoid question
no the code i pulled was 1860 not 1870...i was looking at the code scanner when it pulled up and have the printout in front of me...TCC solenoid pwm ground fault...most probably caused by failed solenoid...i have a spare trans that i am going to flip over and pull valve body and all out of and swap over...may take some pics of the inside since i cant find any online
Comment
-
Re: TCC solenoid question
In the very front of the valve body, under the pump. It is held in with 2 bolts and has a tube that goes up into the pump.Last edited by bigbrian442; 06-19-2010, 08:42 PM.sigpic
Comment
-
Re: TCC solenoid question
Originally posted by stormwolf1972 View Postno the code i pulled was 1860 not 1870...i was looking at the code scanner when it pulled up and have the printout in front of me...TCC solenoid pwm ground fault...most probably caused by failed solenoid...i have a spare trans that i am going to flip over and pull valve body and all out of and swap over...may take some pics of the inside since i cant find any online08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine
Comment
Latest Topics
Collapse
-
by ssms5411So my truck is finally getting some work done, after 17 years, Oil pressure sensor went out and it’s located under the lower intake manifold. Have to...3 weeks ago
Comment