I want to get rid of my two piece stock driveshaft on my 94' Camaro. I was just curious if the driveshafts off of the 3.8 and lt1 would bolt right up and work without a problem to my 3.4. Thanks
Announcement
Collapse
No announcement yet.
Driveshaft Question
Collapse
X
-
Re: Driveshaft Question
Just look for a used LS1 alm. driveshaft or 98+ 3.8 alm driveshafts off ebay or look at craigslist n your area. Should find one for about $100 plus shipping on ebay and craigslist maybe $50-$75, if you find someone in your area parting out a LS1. Also if you find someone in your area , you can see if you can pick up the rearend too, if its a 3 channel and a posi you might luck out.08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine
Comment
-
Re: Driveshaft Question
Originally posted by Green94Maro View PostOk so do you guys have any suggestions on which aftermarket driveshaft to buy?
you can find good used aluminum driveshafts on ebay and ls1tech for around $100 or so. i got mine from a guy on ls1tech for $40 shipped to my house.. watch out and you will get a good deal on one
Comment
-
Re: Driveshaft Question
^ X2, I was lucky and got my alm. driveshaft free and even installed free along with a Torsen diff and 3.42's, well I paid $150 for the Torsen LSD and 3.42's but were installed for free. LOL08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine
Comment
Latest Topics
Collapse
Comment