Welcome to the FirebirdV6.com/CamaroV6.com forums.
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact contact us.
If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I just picked up a T5 from the junk yard, but it was missing the wiring harness.
Will the auto wiring harness plug into the one from the automatic one?
or do I need to go and ask for some of the wiring harness?
My bird, is a 2000 pontiac firebird with the 4l60E, I picked up an T5 that came from a 99 firebird.
the best bet would be to get a whole wire harness for a 99 but you will need a tuning program other wise cause u wont pass emissions if you switch to a t5 with out removing codes in the pcm
I'd try to get a hold of Meatyshells. He did a A4-T5 swap, although I'm not sure if he had a T5 harness or not. I just did/still am doing an A4 3.8-M6 LS1 and I had to wire just a few things in but I had the M6 harness. It is definitely doable, you just have to know how to read wiring diagrams.
not worried about the tuning part, just was curious more about the wiring for it. It does have the plug for the VSS equiped, but the other wiring for where the reverse lights and such, looks like something plugs in there. I have not had the chance to compare the 2 yet, IE examine my tranny yet. and figured I'd ask, because it looks like a snag to me, and might have to contact the junk yard to see if they have the wiring part.
A A4 wire harness will work but you won't need about 11 wires I think , when I went from a M5 to A4 I ordered a Speartech add-on harness which I had to install I think it was 11 wires into the PCM a ground wire and a 12V ign. wire, worked perfect. So you would just need to look at the PCM pinouts that are listed here on firebirdv6 in the Tech base and delete them out. Me personally I would stey with the A4, they hold more power and when set up right are quicker than M5's.
08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine
Still trying to find oil leak on my Camaro, it’s a tough one. I think it is the oil pressure sender myself. Leaking when raving and going into boost....
3 days ago
FORUM SPONSORS
Collapse
Working...
X
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Tweet
Comment