Tweet
I'm going through the install in my head. I have the mount and poly swaybar bushings, hopefully they'll work fine. What are we supposed to use for the stud to connect the mount to the cross member?
-
-
Re: Installing poly transmission mount
Theirs a write up on it in the how to's. Pretty easy.08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine -
Re: Installing poly transmission mount
The link in the How To post is brokenComment
-
Re: Installing poly transmission mount
Rather unfortunate that it's down at the current time...
Anyone have an answer? I'd really like to get this done soon.Comment
-
Re: Installing poly transmission mount
I just opened the how to for the poly mount. Works fine.08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engineComment
-
Re: Installing poly transmission mount
I'm still getting a 404 error for the turbofirebird.com site.
Reckon you could copy the instructions for me? I've tried different browsers to see if that's the problem, but I don't know...Comment
-
Re: Installing poly transmission mount
iGoRa's site is down for good. Try this write up instead.
http://forum.camarov6.com/showthread.php?t=63742'99 Camaro
'04 Saab 9-3 Aero
'90 Audi Coupe QuattroComment
-
Re: Installing poly transmission mount
Got done with the install today, I had to trim down the crossmember quite a bit. It's all good now, took me about 3 hours to do (I'm a slow worker). Shifter doesn't bounce around at all anymore, but vibration like a motha whenever I'm accelerating. I used poly sway bar bushings, hopefully they'll hold up.Comment
-
Re: Installing poly transmission mount
Does the vibration go away after a while?Comment
-
Re: Installing poly transmission mount
I'm hoping so. Mile 20 or so, so far. We'll see.Comment
-
Re: Installing poly transmission mount
the viberation will not fully go away but as long as you don't lug the engine you will not notice them.Comment
-
Re: Installing poly transmission mount
I used stock rubber bushings and their alot more forgiving. No vibration with the M5 or A4.08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engineComment
-
Re: Installing poly transmission mount
Just a parts store buy? Or is that dealer?Comment
-
Re: Installing poly transmission mount
either one would be my guess.08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engineComment
-
Re: Installing poly transmission mount
Idling, I get very little vibration, if any. Now accelerating, I get lots of vibration at certain rpm.Comment
-
So my truck is finally getting some work done, after 17 years, Oil pressure sensor went out and it’s located under the lower intake manifold. Have to...1 week ago -
Hey guys. For starters I’ve always been a big car guy, I love all types of cars and can appreciate all types of engineering. I’ve always been a Chevy...3 weeks ago -
Getting a message saying invalid interface, haven’t used it since last year probably November. First time in 23 years I had a problem. Going to get...4 weeks ago
Comment