Tweet
Pretty much what the title says. I have this really annoying rattle in my shifter when floor the car and rpms are at 4000 and up. I have a hurst short shift in there but put lock tight on all the bolts. Normal driving and accelerating everything is just fine, its only at WOT and high rpms. Anybody have any ideas?
-
-
Re: Shifter Rattle at WOT
Even the bolts for the stick itself? My short stick on my pro 5.0 was doing the same thing and the 2 allen bolts that hold the stick to the base were real loose. Might check your tranny mount also.1997 Chevrolet Camaro
L26, Pacesetter headers, SLP cai, Centerforce DF clutch, Pro 5.0 shifter, UMI short stick, 1le driveline, J&M 35mm front swaybar, UMI lca's/phb/sfc's, KYB AGX shocks, Hotchkis stb. -
Re: Shifter Rattle at WOT
O no I didn't tighten the 2 allen bolts, I'll have to check that tomorrow at some point. Someone else I was talking to mentioned tranny mounts, guess I'll give those a look too.Comment
-
Re: Shifter Rattle at WOT
Those are as tight as can be, guess its time to check the tranny mounts.Comment
-
Hey guys. For starters I’ve always been a big car guy, I love all types of cars and can appreciate all types of engineering. I’ve always been a Chevy...2 weeks ago -
Getting a message saying invalid interface, haven’t used it since last year probably November. First time in 23 years I had a problem. Going to get...2 weeks ago -
-
need help finding a balancer and a replacement balancer bolt. im at a lost after confusing myself researching.2 weeks ago -
Hello every one, ozzy here ive been looking at this page for weeks now finally joined. So my question is why is it that every turbo build forum just ends...3 weeks ago
Comment