Crossmember modification with Poly trans mount

[StockV6Cam]

Besides making a spacer to raise the transmission to it's stock height, do you have to drill a hole in the crossmember? It looks like the bolt would sit near the edge of the crossmember. How did you guys who installed the Energy Suspension mount install it?

[Ian]

check my website, under the Modification Page.

itll show you what it looks like.

site link in my signature

[Wicked 3800 V6]

I thought you meant the tunnel brace. I did a simple mod for that one that involved 4 bolts ... [img]smile.gif[/img]

[C.O.Jones]

Hey Ian, did you also widen the bottom larger oval (one that gives you access to the bolt)? I widened mine just enough to get an open ended box wrench in there.

[Ian]

nope, i just drilled about 1/2" in front of the oval. i used a socket to take the bolt off and put it on

[zlexiss]

I managed to reach in the stock hole with a crow's foot to get the mount tightened up enough, so I only enlarged the slot on the top side to line everything up. I love angle grinders..