Tweet
My clutch has been sticking reallly bad lately. It will stick in and not come out. It only happens while im in gear. Also every once in a while it sticks in gear and i cant get it out i have to let it stall then turn the car off and pull the clutch out then it works fine. I had someone tell me its the clutch master, I am wanting to get a few opinions before I replace it tomorrow to make sure thats it really is the clutch master before I get a new one.
-
<a href=\"http://www.cardomain.com/ride/2038380/5\" target=\"_blank\">http://www.cardomain.com/ride/2038380/5</a> <br />pacesetter hi-flo cat, slp loudmouth 2 w/3.5 slash tips<br />Springtech lowering springs 1.75 drop<br />Hurst sts w/ short-throw stick<br />Not yet installed-pacesetter headers<br />Zexel-torson lsd<br />3.73\'s -
it really sounds like the master cylinder. when mine was gone i couldnt get it to go into gear either. they seem to be a decently common thing to go. more so on the ls1's but a few people on here have had to replace them. good luck with it. keep us updated.1998 bright red camaro ,M5 ,Y87 ,stock<br /><br />Originally posted by Rune:<br />If it smells like a turd and looks like a turd, chances are its probably not a candy bar. -
Are you sure its the master cylinder?? I thought it would be the clutch master?Originally posted by loser:
it really sounds like the master cylinder. when mine was gone i couldnt get it to go into gear either. they seem to be a decently common thing to go. more so on the ls1's but a few people on here have had to replace them. good luck with it. keep us updated.
Any one else have any ideas?<a href=\"http://www.cardomain.com/ride/2038380/5\" target=\"_blank\">http://www.cardomain.com/ride/2038380/5</a> <br />pacesetter hi-flo cat, slp loudmouth 2 w/3.5 slash tips<br />Springtech lowering springs 1.75 drop<br />Hurst sts w/ short-throw stick<br />Not yet installed-pacesetter headers<br />Zexel-torson lsd<br />3.73\'sComment
-
So my truck is finally getting some work done, after 17 years, Oil pressure sensor went out and it’s located under the lower intake manifold. Have to...1 week ago -
Hey guys. For starters I’ve always been a big car guy, I love all types of cars and can appreciate all types of engineering. I’ve always been a Chevy...3 weeks ago -
Getting a message saying invalid interface, haven’t used it since last year probably November. First time in 23 years I had a problem. Going to get...4 weeks ago
Comment