Tourqe Converter Question?

[ravenp]

He's not exactly co-ercing people though... he's just really high on them [img]smile.gif[/img]

I think $$ was the reason anyone even considers them... sure they aren't very deeply penetrated in the v6 community but none of the other ones are really either.

I'll be sure to post my new numbers in May when I run with my edge. [img]graemlins/fluffy.gif[/img]

[jmorgan]

honestly i belive that a certain person with a 3600 edge converter (see i could be talking about anyone not just evan) is to much converter for our cars with no power adder or raised rev limiter

i do belive with a nice cam and a raised rev limiter to 6500 then you could see some nice gains but what i wanna see is how good it is on a stock engin to prove my theory so far i have not been proved wrong (i actully want some one to prove me wrong) if im wrong great then we will know 3600 is not to much of a stall but honestly it looks like it is cause no one has run a good time with one other then jeff and i think a higher rev limiter with a cam would do wonders for his car and a diet too

da notorious DOM: keith will you help the community and dyno your car
da notorious DOM: so we can see the efficiency of PI
da notorious DOM: will you help the community?
da notorious DOM: keith, man same old' tude
da notorious DOM: take your piss poor attitude elsewhere

[jmorgan]

ahhhhhhhhhhhhhhh i have a very good question for everyone with an aftermarket converter


whats your rpm at like 80-90 at wot?

im serious i need the info to prove what i think

please list stall speed, eff., and str plz

[ February 06, 2003: Message edited by: Jason Morgan ]</p>

[ravenp]

bringing in an AIM conversation is low, especially when you're not in it... [img]graemlins/thumbsdown.gif[/img]

[jmorgan]

<blockquote>quote:</font><hr>Originally posted by Magnus:


Talk about Edge, talk about converters, but quit the bad mouthing.<hr></blockquote>


im trying too im serious i really wanna know rpms of people with converters at 90mph at wot

i think that with the info i could show how my theory is right (maybe not but i need the info to see)

i was asked to ask (post the text sorry)

im all for the betterment of the v6 community

magnus what rpms you running at 90mph (end of the 1/4)?

[ February 06, 2003: Message edited by: Jason Morgan ]</p>

[Magnus]

I've had enough of you Jason... I warned you twice..

that convo with Dom doesn't even involve me. I have everyone blocked that isn't on my list and he deifnately isn't on it.

You need a timeout. You're just being an instigater.

[jmorgan]

rpms at 90 mph?

what did you warn me about? ive been talking converters the past 3 posts after you told me too

[jmorgan]

* goes to corner of room and puts nose in corner *


converter content: PI 0wNeS j00

[NBMA4V6]

Cant we all just get along?????

with that said i go through the trap, just after shifting into 3rd. RPM i would say are about 5000. thats just a guess though.

i agree.

Vigilante Ownz JOo

:D

[jmorgan]

thanks jeff for the info


i need to know from a few more though to make sure but im right so far

ruthlessness: my queso is RUTHLESS

[ February 06, 2003: Message edited by: Jason Morgan ]</p>

[NBMA4V6]

and o yeah my vigilante was not 700 bucks. who pays full price..pff not I :D and the customer service was worth the money.

[Only4U]

<blockquote>quote:</font><hr>Originally posted by Magnus:
take it OFF of the board!<hr></blockquote>

nope, leave it on the board or shut the hell up, i don't paricularly care to get another hate email again.

[Magnus]

Evan, please forward any hate e-mails to me and the admins. This is the second complaint i've heard of this nature in the past few days from various members.

Thanks.

[jersey]

edge converter 3020 stall 2.37 str.

90mph....3500 rpm in overdrive..

i have 3.42's in the rear

[hawgs]

<blockquote>quote:</font><hr>Originally posted by Magnus:
take it OFF of the board!<hr></blockquote>

<blockquote>quote:</font><hr>Originally posted by Magnus:
Evan, please forward any hate e-mails to me and the admins. This is the second complaint i've heard of this nature in the past few days from various members.

Thanks.<hr></blockquote>

how the hell does this make sense keith? honestly, your aguements are totally contradictory. you say take it off the board but then when it is you want that too and will hold that against someone?