Hand brake rubber dust keepers

[iGoRa]

My hand brake rubber dust keepers are destroyed. Im talking about rubber boots on the rear axle on both sides, where the hand brake cable plugs in to. It is # 53 on the pic from service manual . It olds by the plate # 57 and the hand brake lever goes thru it(#56).

I went to the dealer with that picture, and they don't have even a part number for it in the DB.
I believe that happened for almost everybody by now, what is the fix for that?
I already do have sand and dust inside and would like to get it fixed before winter comes.
Thanks to all.

[ November 01, 2005, 07:31 PM: Message edited by: iGoRa ]

[FunkZ]

You mean #53 on the pic, right?

Is that the seal on the under side of the car where the ebrake cable comes through?

[iGoRa]

Yes, edited.

cable hooks to the lever(#56) and lever goes thru it.

[98Camaro3.8]

The dealer is correct, you cannot buy that part seperately. In that pic, you need part #38. Note that the pic you provided and the part number you'd get from it is only if you have traction control.

[iGoRa]

yes , this part is 388 for each side, I don’t think that 2 inch rubber with 800 price mark is OK.
I’m wondering how everybody else dealt with this problem?