Tweet
Alright, I got my Eaton LSD, Motive 3.73's, and Ratech complete gear install kit. My car currently has 3.08 open diff two series. Do I need anything else?
-
-
I would recommend a girdle and a stud kit.
g2002 Pewter V6 Camaro M5 <br /><br />Quickest stock-motor N/A V6 4th Gen F-body.<br />2nd Quickest N/A V6 4th Gen F-body overall.<br />mods: Gear, weight reduction, tuning <br /><br />Fear the Gear. 13.585 @ 100.05 1.827 60\'<br /><br /><br /><a href=\"http://www.NJFBOA.org\" target=\"_blank\">www.NJFBOA.org</a> -
OMG I THOUGHT I HAD EVERYTHING!!! do i need that^^^^^^^ or what? im in same boat as inotsobaddComment
-
welcome aboard, shouldnt the gear install kit come with a girdle and stud kit :/. If not where can I get one :\Comment
-
Also, what about the ABS ring? Need that to correct?Comment
-
i heard it was 4 4.10's!! someone corret me if i am wrong but i just went to store and got an inner outter of each pinion bearings and carrier bearings for 50 bucks am i set?Comment
-
Thunderracing.com
TA Performance Products Rear End Cover with Engraved "Thunder Racing" Logo, 7.5" GM 10 Bolt $154.99
TA Performance Products Main Cap Stud Kit, GM $24.99
Ratech Complete Gear Install Kit, GM 7.5" 10 Bolt $94.99
Complete Kit: Includes pinion shims, carrier shims, crush sleeve, pinion seal, pinion nut, ring gear bolts, cover gasket, and pinion & carrier bearings
This is everything you need. All a very wise investment when doing a rear end.2002 Z28 A4
SLP Lid | TSP Rumbler | P&P Throttle Body | No Cats | 3.42s | M/T Drag Radials | No Front Sway Bar
12.76 @ 108.42 w/ 1.90 60’
Comment
-
I got the ratach complete gear install kit, do I really need the cover? What are the stud kits?Comment
-
Stud Kits help keep bearing caps from walking in housing.Originally posted by 1NotSoBadAssBird:
What are the stud kits?2002 Z28 A4
SLP Lid | TSP Rumbler | P&P Throttle Body | No Cats | 3.42s | M/T Drag Radials | No Front Sway Bar
12.76 @ 108.42 w/ 1.90 60’
Comment
-
do I really need the cover tho? I wont even be near enough horse power to actually break a cover.Comment
-
TA Performance's rear-end covers (girdles) are designed to improve ring and pinion gear life by pre-loading the bearing caps while also adding additional strength to your rear end housing.Originally posted by 1NotSoBadAssBird:
do I really need the cover?
I recommend it. ;)2002 Z28 A4
SLP Lid | TSP Rumbler | P&P Throttle Body | No Cats | 3.42s | M/T Drag Radials | No Front Sway Bar
12.76 @ 108.42 w/ 1.90 60’
Comment
-
cars = so damn expensive roflComment
-
what if i cant afford the thunder racing cover and want to buy it in a month or so after i have installed everything would it be ok!Comment
-
yeah I dont think it would make a difference, Im buying the girdle just to finish off the differential. I dont think the cover would make such a big deal though.Comment
-
i believe we DO need the abs ring as i just bought that! am going to shop tomm. to see if i have everythingComment
Comment