Axle Removal Question - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

Axle Removal Question

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Axle Removal Question

    I just ordered my zexel limited slip diff. from amm performance and the only instruction I've found for installing it is Jordan Musser's page. I was wondering what will I have to do to get the axles out since I have rear discs and his page shows how to do it on drums. Thanks.
    BTW I have a 99 M5
    99 Camaro *SOLD* 8/27/03<br />03 Toyota Tacoma X-Tra cab, 5spd, TRD package

  • #2
    You have to remove the calipers, then remove the rotor. You might need some dykes to cut the little clips. Push the axles in on both sides, then take the C-clips out of the axles on the inside of the Carrier. THen the axles will just pull out the sides. It will make a mess, the axles will be covered with gear oil.
    Teal 94 Camaro 3.4 Liter<br />Transgo stage 3 shiftkit, Shift module, corvette servo, SLP cold air induction,3.42 ring and pinion, Heavy Duty Posi LSD, Flowmaster exhaust, NX, blackouts

    Comment

    Latest Topics

    Collapse

    There are no results that meet this criteria.

    FORUM SPONSORS

    Collapse
    Working...
    X