Tweet
bout to change my rear diff fluid and i'm a bit confused as to my gear size. i've heard you can count teeth to determine the size. is there someplace or does anyone know how many teeth there are per size, i.e. 3.42 = x teeth, 3.37 = y teeth? i'd really like to know for sure what size my gears are.
-
you can\'t get off if you don\'t get on -
Just look for the GPO code on your door...it will tell you your gear size.<a href=\"http://www.onid.orst.edu/~waltejam/\" target=\"_blank\">98 Bright Red Camaro</a><br />Too many mods to list....check my website -
count the teeth of the ring vs the teeth of the pinion.
ratio = 3.42:1 or 3.23:1 etc etc.2002 5-spd NBM Camaro
Details: www.1lev6.comComment
-
<blockquote>quote:</font><hr> count the teeth of the ring vs the teeth of the pinion.
ratio = 3.42:1 or 3.23:1 etc etc
<hr></blockquote>
Thank you for not just saying to use the RPO code. ;)\" As being is to becoming, so is pure itellect to opinion, so is science to belief, and understanding to the peception of shadows.\" - PlatoComment
-
To figure out your diff. gear ratio count the number of teeth on the ring gear,count the number of teeth on the pinion gear then divide the two numbers. I.E. ring gear count:41,pinion gear count:12, 41 divided by 12= 3.4166666 I.E. 3.42:1Comment
-
thank ya much.you can\'t get off if you don\'t get onComment
-
So my truck is finally getting some work done, after 17 years, Oil pressure sensor went out and it’s located under the lower intake manifold. Have to...2 weeks ago
Comment