ok a couple questions.

[chrisfilling]

what exactly is gears I have been reading about them on here but I don't really understand them. I have a 94 auto with a ZEX nitro kit, PS headers, High Flow Cat, K&N CIA, and Dual Flowmaster exhaust I am looking for the next step to help out my car I want maxium performance out of this 3.4 any help would be great thanks

[Wicked 3800 V6]

"Gears" are almost always the term referring to the ring and pinion gears in your rear end (i.e. the rear axle -- the driveshaft goes into the middle of this, and then the "motion" goes through the gears, into the axles, and out the wheels). Stock our cars come with 3.08, 3.23, and 3.42 ratios typically -- a 3.73 or 4.10 ratio will afford a more agressive launch, and will let you "use" more of the powerband during a track pass.

More info can be found in the "Drivetrain" forum.

[Camarorulz]

If you're looking at a gear swap 3.42s seem to be the best all around gear for V6 f-bodies: if you're looking to go more aggressive I would go no higher than 3.73s.