Tweet
I am installing a auburn LSD and 3.42 gears. I am doing it myself. I know some of you have done it before and I was wondering if there was anyhing you could tell me to look out for or be careful of.
-
96 3.8 red camaro. <br />headers,cam,valve springs,retainers,auburn lsd,3.73 gears,SLP cold air,accel coils,24lb injectors,8mm plug wires,air temp module,LT1 diveshaft,removed a/c,edelbrock torque arm,spohn LCA\'s and PHR -
No takers huh? Ok, I guess I'll let you know how it goes.96 3.8 red camaro. <br />headers,cam,valve springs,retainers,auburn lsd,3.73 gears,SLP cold air,accel coils,24lb injectors,8mm plug wires,air temp module,LT1 diveshaft,removed a/c,edelbrock torque arm,spohn LCA\'s and PHR -
you getting the whole rear end or just the rear set and diff? i'm guessing you've never done a ring and pinion before... might not be something you want to get into.
best advice i can give: torque everything to spec, clean gasket mating surfaces thoroughly!Comment
-
I bought the auburn high performance limited slip differential, and a set of richmond 3.42's. I have had them for about 4 months, and finally got the time to put them in. I know how to do it on a 1974 chevy nova but obviously its gonna be different on my 96. do our axles have C clips or axle caps??96 3.8 red camaro. <br />headers,cam,valve springs,retainers,auburn lsd,3.73 gears,SLP cold air,accel coils,24lb injectors,8mm plug wires,air temp module,LT1 diveshaft,removed a/c,edelbrock torque arm,spohn LCA\'s and PHRComment
-
-
c-clips... if you've set up a rear end before, then more power to you. make sure your adjustments are precise and accurate [img]smile.gif[/img]Comment
-
if its c clips its gonna be easy. I have to wait until monday though. Stupid machine shops wont press my bearings on and the only place that'll do it is closed for the weekend. Grrrr.96 3.8 red camaro. <br />headers,cam,valve springs,retainers,auburn lsd,3.73 gears,SLP cold air,accel coils,24lb injectors,8mm plug wires,air temp module,LT1 diveshaft,removed a/c,edelbrock torque arm,spohn LCA\'s and PHRComment
-
It's C-Clips. [img]smile.gif[/img]Tom<br />Too many mods for this sig.<br /><a href=\"http://www.l337server.com/Tom/cars.html\" target=\"_blank\">My car\'s site</a><br /><br /><a href=\"http://www.FullThrottleV6.com\" target=\"_blank\">www.FullThrottleV6.com</a>Comment
-
Hey guys. For starters I’ve always been a big car guy, I love all types of cars and can appreciate all types of engineering. I’ve always been a Chevy...2 weeks ago -
Getting a message saying invalid interface, haven’t used it since last year probably November. First time in 23 years I had a problem. Going to get...2 weeks ago -
-
need help finding a balancer and a replacement balancer bolt. im at a lost after confusing myself researching.3 weeks ago -
Hello every one, ozzy here ive been looking at this page for weeks now finally joined. So my question is why is it that every turbo build forum just ends...3 weeks ago
Comment