Tweet
Ok I have my center console off and im looking at the rubber boot that is wrapped around the original stick. Ive takin the three small screwws out that hold the boot in place. Now here is the problem the boot wont budge. Is there some glue under it or something? How do I get it off? Thanx
-
Factory:Camaro 5 speed, Color Pewter, w/ t-tops and Y87 package. <br />Engine: K&N filter w/ Whisper Lid, FRA, Borla adjustable cat-back exhaust. Hurst w/ Short Stick<br />Interior:Oil temp. and Air/Fuel ratio gauges, System.<br />Exterior: Black outs front and back, 18 in. Lenso rims w/ Kumho Supra 275/35ZR18 tires, also limo tint on sides and back.<br />173.2rwhp-----200.5tq -
4 nuts holdin that boot on.
4 bolts holding the shifter on.
Don't forget to make an RTV seal between the new shifter and the trans, and please by all means follow the RTV directions (let it dry, go eat lunch or something, dont do it wet).
you're almost done.2002 5-spd NBM Camaro
Details: www.1lev6.com -
Yes, there is some glue that holds the stock boot to the transmission plate. On my car, there were seven 7mm screws holding this boot to the trans. plate. After I had those out, the boot didn't move. You can get the boot off by using a flat head screwdriver. There shouldn't be too much glue holding the boot the the plate. Hope this helps. I just did mine last night :D I think you'll really love it. I know I do. I got the short stick to go with it and it is sick.2002 Camaro RS, SLP CAI, 80 Series Flowmaster, Whisper Lid, K & N Air Filter, Hotchkis STB, Hurst Competition Plus Shifter, Lou\'s Short Stick, Slotted/Cross Drilled Rotors, Kenwood Excelon KDC-X569, Viper Alarm System. 35% Tint all aroundComment
-
Oh, and by the way, be sure to use the bolts that came with the shifter (the one's that hold the shifter to the trans. plate. I accidently forgot I had them and re-used my factory bolts.2002 Camaro RS, SLP CAI, 80 Series Flowmaster, Whisper Lid, K & N Air Filter, Hotchkis STB, Hurst Competition Plus Shifter, Lou\'s Short Stick, Slotted/Cross Drilled Rotors, Kenwood Excelon KDC-X569, Viper Alarm System. 35% Tint all aroundComment
-
Thanx i will look for the other bolt and get a flat head screw driver. I already got the Short stick on will go out and try. Also have the RTV sealant.Factory:Camaro 5 speed, Color Pewter, w/ t-tops and Y87 package. <br />Engine: K&N filter w/ Whisper Lid, FRA, Borla adjustable cat-back exhaust. Hurst w/ Short Stick<br />Interior:Oil temp. and Air/Fuel ratio gauges, System.<br />Exterior: Black outs front and back, 18 in. Lenso rims w/ Kumho Supra 275/35ZR18 tires, also limo tint on sides and back.<br />173.2rwhp-----200.5tqComment
-
Ok now i have removed the four bolts holding on the shifter but i cant get the plate to budge, even tried to pry it, nothing. Any sugestions?Factory:Camaro 5 speed, Color Pewter, w/ t-tops and Y87 package. <br />Engine: K&N filter w/ Whisper Lid, FRA, Borla adjustable cat-back exhaust. Hurst w/ Short Stick<br />Interior:Oil temp. and Air/Fuel ratio gauges, System.<br />Exterior: Black outs front and back, 18 in. Lenso rims w/ Kumho Supra 275/35ZR18 tires, also limo tint on sides and back.<br />173.2rwhp-----200.5tqComment
-
http://www.installuniversity.com/ins...er_install.htm
Not sure if you've read that, but it has step by step instructions.
I had to get a screw driver to pry it off. Just keep prying and it should come loose.Matt
1998 Mystic Teal Camaro M5
Whisper Lid, Pacesetter Headers, Catco Cat, Dynomax Super Turbo, B&M Shifter, BMR STB, LSD, P&P Intakes, GT2 Cam, Comp OE Lifters, 1.7 Roller Rockers, Pushrods, SSM Heads, DHP PowrTuner.Comment
-
Alright final got the plate off and the hurst is in. and it is awsome shifts are firmer and shorter I am very pleased.Factory:Camaro 5 speed, Color Pewter, w/ t-tops and Y87 package. <br />Engine: K&N filter w/ Whisper Lid, FRA, Borla adjustable cat-back exhaust. Hurst w/ Short Stick<br />Interior:Oil temp. and Air/Fuel ratio gauges, System.<br />Exterior: Black outs front and back, 18 in. Lenso rims w/ Kumho Supra 275/35ZR18 tires, also limo tint on sides and back.<br />173.2rwhp-----200.5tqComment
-
Hey guys. For starters I’ve always been a big car guy, I love all types of cars and can appreciate all types of engineering. I’ve always been a Chevy...2 weeks ago -
Getting a message saying invalid interface, haven’t used it since last year probably November. First time in 23 years I had a problem. Going to get...2 weeks ago -
-
need help finding a balancer and a replacement balancer bolt. im at a lost after confusing myself researching.3 weeks ago -
Hello every one, ozzy here ive been looking at this page for weeks now finally joined. So my question is why is it that every turbo build forum just ends...3 weeks ago
Comment