B&M shift improver

[kidkash8009]

buoght my B&M shift improver awhile ago and put it on today and noticed no difference at all im thinking i did it wrong i have a 97 3.8l anybody have any ideas what may have gone wrong?

[cb1101]

I think you did it wrong....you should be feeling much tighter shifts.

This is the kit right...not the electronic one?

[kidkash8009]

no its the electric one but i already disconnected and give it a big [img]graemlins/thumbsdown.gif[/img]

[pigglyroot]

it's VERY EASY to hook up, you have to splice into 3 wires i think, i had it on my lightning for a month or so, and it boosts line pressure for much firmer shifts on level 2 and pretty nice shifts on level 1, you installed it wrong buddy [img]graemlins/dunce.gif[/img]

[RamAir95TA]

Boosting line pressure isn't always the best way to firm up your shifts. It is, however, a good way to prematurely blow out seals in the transmission.

[kidkash8009]

well i checked it out today and found the problem the clips werent pushed in the connector far enough so it works now. But i might sell it to my dumb friend with a galant cuz he thinks it will work on his car even after i told him it wouldnt, so i told him $60 and he said ok. :D

[ March 22, 2003: Message edited by: kidkash8009 ]</p>

[TurboKillaZ]

<blockquote>quote:</font><hr>Originally posted by kidkash8009:
well i checked it out today and found the problem the clips werent pushed in the connector far enough so it works now. But i might sell it to my dumb friend with a galant cuz he thinks it will work on his car even after i told him it wouldnt, so i told him $60 and he said ok. :D

[ March 22, 2003: Message edited by: kidkash8009 ]<hr></blockquote>

[img]graemlins/rofl.gif[/img] [img]graemlins/rofl.gif[/img] poor friend