Tweet
I wenty o get a new tranny mount and they aid i have a hydrolic tranny mount. what the hack is that? and how does it work and is it easy to install?
-
1996 CAMARO M5 3.8, SLP CAI, FLOWMASTER CAT BACK WITH 80 SERIES.<br />MODS ON THE WAY ZEXEL LSD, ONE PIECE DRIVESHAFT. -
you should try another store. I replaced my trans mount, and they never mentioned anything about it being hydraulic to me.
FYI, it will be GM part # 22145293 and is about $59.00 ordered through them.
-Marcsigpic -
bah go to autozone and ask for a transmission mount for a Camaro (94 and up is ok...mine is for a 95 LT1 and it still works)
edit: It's around $25 and it has a LIFETIME warranty. I busted it once (again [img]tongue.gif[/img] ) and I got a free replacement. Can't go wrong with it.
[ April 02, 2003: Message edited by: 99Camaro99 ]</p>Comment
-
How can you tell if you busted one? Just wondering, I'm a NEWB when it comes to cars [img]smile.gif[/img]RedLineVSix <br />95 Patriot Red Trans Am, M6, 3.42\'s,no rear tires<br />(SOLD!)97 Silver Camaro 3.8 Liter A4 3.42 + LSD, 1pc DS, and one messed up speedo :)Comment
-
<blockquote>quote:</font><hr>Originally posted by raxxus:
How can you tell if you busted one? Just wondering, I'm a NEWB when it comes to cars [img]smile.gif[/img] <hr></blockquote>
Normally, just after you let off of the gas peddle after hard acceleration, you'll hear a "BANG" sounding like it's right underneath you. Or, you can take a floor jack and slowly jack up the rear of the trans where it meets up with the driveshaft, if you see the trans start to seperate from the crossmember, it's time for a new mount. Only need to jack it up a little bit, don't go crazy with it.
-MarcsigpicComment
-
and if you have an automatic, under hard acceleration (4,000rpm upshifts or higher) you'll feel like a bowling ball is hitting the bottom of your car where the transmission is (when in fact it's your tranny hitting the bottom of the carComment
-
You guys never heard of a hydraulic tranny mount???
They or on the shelves right next to the Blinker Fluid and the Muffler Bearings....1997 Chevrolet Camaro v6 - 13.8@104MPH
1997 Dodge Viper GTS
Comment
-
Why not just get a polyurethane mount? They are like 20 bucks, and last alot longer and are nice and tightAll gone :(<br />Best ET ever: 14.3 (I think)<br />----------------------------<br />Check out my site for exhaust clips, burnouts, and pictures, and the supercharger throttle body mod.<br /><a href=\"http://www.geocities.com/net_addict/index.html\" target=\"_blank\">Click on the Firebird</a>Comment
-
<blockquote>quote:</font><hr> You guys never heard of a hydraulic tranny mount???
They or on the shelves right next to the Blinker Fluid and the Muffler Bearings.... <hr></blockquote>
Thanks for the reminder!
I almost forgot to change to spring blinker fluid!2002 CAMARO \"RS\"<br /> 3800/M5/Y87Comment
Comment