Would this tranny work? - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

Would this tranny work?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Would this tranny work?

    I'm thinking about replacing my tranny since it's leaking and it has 136k on it. It's not acting up and I'm taking it to the shop to check out the leak, but I'm getting ready for it in the future.

    I found this
    http://cgi.ebay.com/ebaymotors/95-97...44109260QQrdZ1
    Performance tranny for $1200 including shipping, sounds good. Now it doesn't specify if it's for the 5.7 or 3.8 why is that? Will this work? His seller ratin is 100% so it seems like a good company.

    I have a mechanic that I trust that could put this tranny in. How much should it cost in labor to take the old one out and put this in? Can I get anything for the old tranny?
    97 Camaro rs 3.8<br />Flowmaster catback<br />High flow cat

  • #2
    I'd say your best bet would be to e-mail the seller to verify whether or not its V8 specific.

    If your looking for a cheap route, people have used junk yard trannies with fine results. I believe eric (shenanigans) has a junk yard tranny iirc
    Black \'94 Trans Am A4- SLP CAI & Loudmouth<br />Red \'93 Firebird A4- Ram Air under the WS6 hood, !cat, exhaust.

    Comment


    • #3
      Labor for a tranny swap should be in the $600 range.

      g
      2002 Pewter V6 Camaro M5 <br /><br />Quickest stock-motor N/A V6 4th Gen F-body.<br />2nd Quickest N/A V6 4th Gen F-body overall.<br />mods: Gear, weight reduction, tuning <br /><br />Fear the Gear. 13.585 @ 100.05 1.827 60\'<br /><br /><br /><a href=\"http://www.NJFBOA.org\" target=\"_blank\">www.NJFBOA.org</a>

      Comment

      Latest Topics

      Collapse

      • Dongrossmd
        Throttle Position Sensor trouble shooting
        by Dongrossmd
        I’m new. I actually don’t own a Camaro or firebird. I do have a 2000 Camaro 3.8 fly by throttle and 4l60e. This is installed in a 1980 Triumph TR7...
        2 weeks ago
      • ssms5411
        New stereo
        by ssms5411
        Not much going on, replaced my Kenwood double din stereo with a Pioneer double din, the Kenwood had problems. Then replaced my power inverter for my reverse...
        2 weeks ago

      FORUM SPONSORS

      Collapse
      Working...
      X