Just got my Z28 rear end!!!!

[MingisDew31186]

I just got my Z28 rear end!! I am going to put it in my car next week. Is there any extra parts I need before instal?

[dstrbd1]

if you got the whole rear end, axle and all, there shouldn't be anything else you need for it, unless you didn't get new e-brake cables. they might need to be changed, mine did. other than that, all you'll need is a good socket set that goes up to 22mm, a heavy duty jack and stands, and if you have access to an impact wrench, it would be a big help.

[MingisDew31186]

Thanks for the help! I'll post on how it goes. Should be installing it on monday or tues.

[MingisDew31186]

OK, what do i do about the ABS?

[Backfire]

What do you mean? Did you not by a non-TCS rear? If you bought a rear end from a TCS car, you have some issues to deal with. There is another post on here recently with the same issues. If you did buy a non-TCS rear, I believe the stock wires should work with the new rear. I could be wrong though. There may be an issue with differences in the ABS reluctor(sp?) wheel on the ring gear, I have seen that brought up as a possible problem spot before.

[ October 03, 2002: Message edited by: Backfire ]</p>

[MingisDew31186]

The car i bought my rear end off of did not have TCS but it had ABS. I know that I can still connect the ABS wire to the connection, BUT the number of pins differ. Do you think there would be any conflicts?

[AZ3.8Camaro]

Where did you get your rear end from?

[MingisDew31186]

Generation X motorsports in peoria IL