BOO 3.42 gears!

[Silver00]

my cost was 300 total. that included a rear off of a 6 spd ta that had 3.42s with the LSD. And I bought a used TA girdle from a board member on LS1.com. The fluid was another 30 bucks. Did the work myself and it wasn't bad at all. so 300 bucks grand total for one *****in mod.

Silver00

oh and one large heath blizzard for the PCM reprogramming from my buddy @ the local pontiac dealership to account for the 3.42s and LSD. can't beat that

[ October 10, 2002: Message edited by: Silver00 ]</p>

[scottblack]

<blockquote>quote:</font><hr>Originally posted by Silver00:
my cost was 300 total. that included a rear off of a 6 spd ta that had 3.42s with the LSD. And I bought a used TA girdle from a board member on LS1.com. The fluid was another 30 bucks. Did the work myself and it wasn't bad at all. so 300 bucks grand total for one *****in mod.

Silver00

oh and one large heath blizzard for the PCM reprogramming from my buddy @ the local pontiac dealership to account for the 3.42s and LSD. can't beat that

[ October 10, 2002: Message edited by: Silver00 ]<hr></blockquote>

sure ya can.
$150 for install and new reluctor/bearings under warranty, $50 for gears and $35 for Auburn LSD.

and that included Y87 programming. all done at the dealer.

bwahahahahahahaa

Scott

[ October 10, 2002: Message edited by: Scott Black ]</p>

[Loochy88]

well, i just got the entire thing done, 450 in all. i can spin both tires too

[Akuma]

Cool, notice any difference with the 3.42s?