Welcome to the FirebirdV6.com/CamaroV6.com forums.
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact contact us.
If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I ordered a used JET SCU2000 and I have no idea how to install it, or what the different notches on the actual unit refer to. ANYBODY that has one, I would be very glad if you could offer me any assistance.
I can't tell you exactly how to install it, but good lord make sure your connection to the fuse box is PERFECT. I can't tell you how many headaches I had being in traffic and all of a sudden my sh*t won't shift out of 1st gear because the connection in the wires came a little loose. I know the long wire with the plug on the end of it plugs into your vehicles speed sensor, located somewhere near the front right wheel well.
I think one wire is a ground, one you just use to connect to a power source which they recommend being one of the headlamp fuses, then the plug that goes into the VSS. plug the old connector to the VSS into the bottom of the new connector that is in the VSS
I think I can PROBABLY figure out how to hook it up, I'll just ask questions when I need to about specific things - the big thing is I DON'T KNOW WHAT THE DIALS ARE!
I know you have to set your old differential ratio and your new one, but I don't know what the numbers stand for! Instead of having the gears listed on the unit, they have "1,2,3,4,5,6,7,8,9" instead of "2.73, 3.08, 3.23, etc"... So if you know what the numbers correspond to and you'd be able to tell me, I'd be much obliged! Thanks a lot for your help so far [img]smile.gif[/img]
Tom<br />Too many mods for this sig.<br /><a href=\"http://www.l337server.com/Tom/cars.html\" target=\"_blank\">My car\'s site</a><br /><br /><a href=\"http://www.FullThrottleV6.com\" target=\"_blank\">www.FullThrottleV6.com</a>
So still, nobody knows the correspondence between the dials/what they stand for?
Please! Anybody? I have this piece of equipment I want to install but nobody's able to tell me what I need to set my dials to... Hell I WILL BUY THE FREAKIN MANUAL FROM YOU!!!
Tom<br />Too many mods for this sig.<br /><a href=\"http://www.l337server.com/Tom/cars.html\" target=\"_blank\">My car\'s site</a><br /><br /><a href=\"http://www.FullThrottleV6.com\" target=\"_blank\">www.FullThrottleV6.com</a>
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Tweet
Comment