diff fill plug

[ka50]

Aight, I've looked in search and found out that there is supposed to be hex plug somewhere? The only plug I found was plastic plug, apparently pressure relief valve. It was on the passenger side on top and a little on the side. The hole was so tiny that I couldn't even stick my pinky in there. I used a piece of paper as a dipstick to measure oil, and apparently oil there is very low... Where is the hex plug supposed to be so I can fill it up?

[AllTheGoodNamesAreGone]

... errr.. its on the housing somewhere..

I cont remeber exactly where.. but I recall it beaing on the passenger side somewhere.. it was pretty dam visable when i changed my fluid.. but that was 2 years ago and I cant really remeber now..

but thanks for reminding me that I need to change those fluids again..

[hou-tex-six]

I think its a 3/8's drive, not a hex. Passenger side of the diffy about half way up. Should be pretty visible.

Cp

[ka50]

front or back of diff?

[hou-tex-six]

umm, on the side. It's not that big, look around, spray some cleaner if its too dirty.

Cp

[love2xlr8]

its on the side, passenger. fits a 3/8 driver into it.

[hawgs]

I think it's on the passenger side and a 3/8 driver into it. Right?

[RallyRed 98]

no... side opposite driver, .375" (or 10 mm)

[hawgs]

I thought it was on the passenger side and a 3/8 driver into it

[RallyRed 98]

[img]graemlins/twak.gif[/img] are you illiterate? i was going to ask if you listened to the new beastie boys song but you probably couldn't understand what they were saying!

[Nathan]

I just did mine this morning and it is definately a 3/8" drive on the passenger side. Half way up on the housing. Your fluid should be filled just to point where it would start leaking out the whole.