Tweet
Ok i need somthing to adjust my shift points and make my tranny shift harder and correct the speedo and i run n20 so i would not need a timing advance so what should i get or do?
THANKS
THANKS
-
-
what was stock?
if stock was 3.08s, you'll need to first have your pcm reprogrammed to read/shift like 3.42s were in the rear. then you can buy a jetscu2000 and fix the speedo and play with tires sizes and such to get the shifts close to where they should be.
if stock was 3.42s, just go straight for the jetscu2000. if you don't know what i'm talking about with the programming of the jetscu, do a search and type like "jetscu 2000 program" or something cause i've seen a few myself...2000 NBM M6 Camaro Z28<br />323/335 -
Or you can send your pcm to zooomer at zzperformance and get him to program it for the aftermarket gears.Longtubes, true duals, ram air, caspers tps tec, ls1 26lb injectors, supersix powerpack, heads milled .020, comp cam .507 220/224 114 ls, forged internals and chromeoly pushrods, bored .030 over, tb spacer, tranny built with stiffer springs and kevlar bands, bigger servo, transgo stage 3 shift kit, edge 3600 stall, 1 pc aluminum ds, 3.73 superior gears, lsd rear ,custom pcm tuning, walbro 255 in tank,Comment
-
Not much going on, replaced my Kenwood double din stereo with a Pioneer double din, the Kenwood had problems. Then replaced my power inverter for my reverse...1 day ago -
Hi all new to the community here. I have a 2014 RS 6 speed manual... and so about a year ago my tail lights got cracked and eventually the plastic housing...2 weeks ago -
Hi, everyone. We bought a 97 base model convertible Camaro and someone broke the motor ... Lights were blinking on the dash and that someone ignored the...3 weeks ago -
Still trying to find oil leak on my Camaro, it’s a tough one. I think it is the oil pressure sender myself. Leaking when raving and going into boost....3 weeks ago
Comment