T5 Tranny from Mustang - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

T5 Tranny from Mustang

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • T5 Tranny from Mustang

    Ok, I don't want any "Well maybe, I'm not sure" answers. I have a tranny out of an 01 Mustang V6. If I picked up a belhousing and crossmember from a f-body will it bolt up? Main concerns are: Belhousing bolt up correctly? Driveshaft length? Shifter position (Will I have to chop the floor up a lil?)

    [ July 19, 2004, 11:11 PM: Message edited by: Th3 RiCk ]
    1998 A4 Pontiac Firebird

  • #2
    Blasphomy I tell you BLASPHOMY!!!

    LOL sry I had too I mean comeon on a Stang tranny in a Comaro...Thats like an Import in a comaro...Ok NOT that bad but still its just WRONG if u ask me.

    As far as I know u shouldn't have any problems with a new bellhouseing. Im not 100% sure but I believe the shifter should line up exactly or very close to where only a little moding required.
    \"Professionals are predicable, but the world is full of dangerous amatures.\"

    Comment


    • #3
      No
      <a href=\"http://www.onid.orst.edu/~waltejam/\" target=\"_blank\">98 Bright Red Camaro</a><br />Too many mods to list....check my website

      Comment


      • #4
        Originally posted by speedy-v6-camaro:
        No
        No reasons why eh? Stay out of the thread if you're not going to actually be any help. [img]graemlins/twak.gif[/img] [img]graemlins/slap.gif[/img] :mad:

        Anyways, I have the tranny laying around because it was swapped into my brothers 5.0, but the speedo and tach were messed up with it. So we found an older tranny from a 5.0 and put it in with no problems.

        I think I read somewhere that this particular transmission can be used on s-10's and blazers. My main concern is the dimensions on the transmission.

        [ July 20, 2004, 03:25 AM: Message edited by: Th3 RiCk ]
        1998 A4 Pontiac Firebird

        Comment


        • #5
          Originally posted by Gargoylebrother:
          Blasphomy I tell you BLASPHOMY!!!

          LOL sry I had too I mean comeon on a Stang tranny in a Comaro...Thats like an Import in a comaro...Ok NOT that bad but still its just WRONG if u ask me.

          A transmission is a transmission. The same transmission maker (Borg Warner now Tremec I think) is in Dodge, Ford, and GM if I'm not mistaken. Oh, and my car was built in Canada, how about yours? I guess that makes it an Import since technically it was imported. ;)
          1998 A4 Pontiac Firebird

          Comment


          • #6
            bellhousing bolt pattern different
            bellhousing "twist" different
            input shaft different
            clutch cable different
            ratios (hence speedometer reading) different


            ad nauseum

            Comment


            • #7
              Originally posted by RallyRed 98:
              bellhousing bolt pattern different
              bellhousing "twist" different
              input shaft different
              clutch cable different
              ratios (hence speedometer reading) different


              ad nauseum
              Finally, an intelligent response. Not exactly the one I wanted to hear though. Thanks RallyRed.
              1998 A4 Pontiac Firebird

              Comment


              • #8
                The input shaft would be your main concern. The Mustangs use a 10-spline input shaft so it would not adapt. You could always have the input shaft changed, but for the hassle, it would be easier to find a tranny that bolted right up.
                - Josh<br />If you have any questions or need installation pics/help, e-mail me: Viper98885@aol.com<br /><a href=\"http://Camaroz28.cardomain.com/id/viper98885\" target=\"_blank\">\'93 Camaro Hardtop</a><br /><a href=\"http://Camaroz28.cardomain.com/id/01lincolnls8\" target=\"_blank\">\'01 Lincoln LS8 Sport</a><br />\'00 Yamaha YZF-R6<br /><a href=\"http://www.ftpp.net\" target=\"_blank\">Full Throttle Performance</a>

                Comment


                • #9
                  Originally posted by Gargoylebrother:
                  Blasphomy I tell you BLASPHOMY!!!

                  LOL sry I had too I mean comeon on a Stang tranny in a Comaro...Thats like an Import in a comaro...Ok NOT that bad but still its just WRONG if u ask me.

                  As far as I know u shouldn't have any problems with a new bellhouseing. Im not 100% sure but I believe the shifter should line up exactly or very close to where only a little moding required.
                  I would shut up if I were you, you cant even spell camaro
                  2005 Cavalier LS Sport M5<br /> <a href=\"http://members.cardomain.com/firefighter8615\" target=\"_blank\">http://members.cardomain.com/firefighter8615</a>

                  Comment


                  • #10
                    I answered your question. You did not say to elaborate. There are many things that would not be right as RallyRed 98 pointed out.
                    <a href=\"http://www.onid.orst.edu/~waltejam/\" target=\"_blank\">98 Bright Red Camaro</a><br />Too many mods to list....check my website

                    Comment

                    Latest Topics

                    Collapse

                    FORUM SPONSORS

                    Collapse
                    Working...
                    X