i am about to purchase the entire rear end from a 95 z, with discs and rear sway bar, but wanted to know if i will have any porblems with abs or nething putting it in my 94 camaro. also, would the stock sway bar be an upgrade, what size is it and what size should i get for the front???
Announcement
Collapse
No announcement yet.
95Z REAR in 94
Collapse
X
-
Don't know about the swaybar(s) size, but they are compatible with the v6 to v8 swap and vise-versa. The ABS plug fits fine too. Just make sure you have the emergency brake cables for disk brakes, new brake pads, and fairly decent rotors and you're good to go.sigpic
-
when I swapped my rear end with a z28 rear, the z28 sway bar was a little bit bigger than my stock one, so I went with the v8 sway bar. Seems to handle a little better with it.
If you can get your hands on a z28 front sway bar as well that would be even better so they compliment each other.
Comment
Latest Topics
Collapse
-
by DoodlerHi, everyone. We bought a 97 base model convertible Camaro and someone broke the motor ... Lights were blinking on the dash and that someone ignored the...7 hours ago
-
by ssms5411Still trying to find oil leak on my Camaro, it’s a tough one. I think it is the oil pressure sender myself. Leaking when raving and going into boost....4 days ago
Comment