Pinion Angle Question/HELP - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

Pinion Angle Question/HELP

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Pinion Angle Question/HELP

    I'm dumb I can't seem to figure out how to adjust my pinion angle. Whats an easy way to figure out your pinion angle. Some people say subtract Driveshaft angle from pinion others say pinion - shaft. Right now my DS angle is 4* and my pinion is -1*. It was like 5* DS and 3* and my gears were whinning really bad. Someone help please.

    PS I have a spohn adjustable torque arm
    Ben<br /><br />1995 White/Black 3.4L<br />As far away from stock as possible<br /><a href=\"http://www.cardomain.com/member_pages/view_page.pl?page_id=288292\" target=\"_blank\">My Site!!!</a><br /><a href=\"http://www.redlinevsix.com\" target=\"_blank\">RedLineV6</a><br />Rebuild and 3.4 T70 Turbo is complete<br />Details to come....

  • #2
    Put the car level, but not on jackstands...it's easiest on an alignment rack but since most people don't have one in their garage, use ramps. Follow the Spohn instructions and you will be good to go.
    - Josh<br />If you have any questions or need installation pics/help, e-mail me: Viper98885@aol.com<br /><a href=\"http://Camaroz28.cardomain.com/id/viper98885\" target=\"_blank\">\'93 Camaro Hardtop</a><br /><a href=\"http://Camaroz28.cardomain.com/id/01lincolnls8\" target=\"_blank\">\'01 Lincoln LS8 Sport</a><br />\'00 Yamaha YZF-R6<br /><a href=\"http://www.ftpp.net\" target=\"_blank\">Full Throttle Performance</a>

    Comment

    Latest Topics

    Collapse

    • Dongrossmd
      Throttle Position Sensor trouble shooting
      by Dongrossmd
      I’m new. I actually don’t own a Camaro or firebird. I do have a 2000 Camaro 3.8 fly by throttle and 4l60e. This is installed in a 1980 Triumph TR7...
      1 week ago
    • ssms5411
      New stereo
      by ssms5411
      Not much going on, replaced my Kenwood double din stereo with a Pioneer double din, the Kenwood had problems. Then replaced my power inverter for my reverse...
      1 week ago
    • 187shark
      Tail light issue causing problems. Please help..
      by 187shark
      Hi all new to the community here. I have a 2014 RS 6 speed manual... and so about a year ago my tail lights got cracked and eventually the plastic housing...
      3 weeks ago

    FORUM SPONSORS

    Collapse
    Working...
    X