Tweet
Im trying to use sea foam and my brake booster line seem to be stuck... can't even move the hose out atleast little bit. any suggestions???
-
-
once the clamp is removed, try twisting the line with a pair of pliers. Normally, the rubber line binds to the plastic housing over time and is a beatch to remove. If twisting doesn't work, spray some WD-40 on the end of the rubber hose where they are connected and wait awhile, then try again. It'll come off eventually, but it'll take some grunt.
-Marcsigpic -
You could also try prying the edge of it a little with a screwdriver if there's anything to push against. That's what I usually do and it loosens the hoses up pretty good.
Chris<b>2002 BSM TransAm WS.6 M6</b><br /><b>350rwhp, 365rwtq</b><br /><b>Stock:</b>13.455 @ 105.39 2.129 60\'<br /><b>Mod:</b>12.449 @ 113 1.832 60\'<br /><br /><b>2004 QSM GTO M6</b><br /><b>303rwhp, 329rwtq</b><br />Stock: 13.74 @ 102.14 2.1 60\'<br /><br /> <a href=\"http://members.cardomain.com/silvertaws6\" target=\"_blank\">http://members.cardomain.com/silvertaws6</a> <br /><br /><b>1984 Firebird S/E M5</b><br />2.8LComment
Comment